anyone compared the accuracy of the CZub barrel to the CZrep?
Just a mindless curious post. maybe someone has done a comparative-accuracy test? Adds to my post count
Darryl
All Replies
I got a full size, CZ-s200 barrel that has 3 dimples on the barrel near receiver end and also a CZub factory mark on the barrel from Peter before he closed shop.
He only had one, they are super hard too get out right.
I had it before Jamie was helping people with his barrels.
I was going too sell it on the yellow form, since I don’t need it now.
I’ll let it go for what I payed 4 it $150.00 it needs to be turned down on a lathe and then blued. Cold bluing will work also.
I’ll post pix later.
If x wants it?
Let me know if the a standard barrel available.
In the mean time, trying to get intouched with the seller. Haven’t got any respond back yet.
X…
The one i have is not up to snuff…. I shot it a bunch today…its going in the scrap bin.
Not all listone barrels are accurate.
If you find a Blank or Buy a LW i can help you with the Machine work….
Dman
Let me know if the a standard barrel available.
In the mean time, trying to get intouched with the seller. Haven’t got any respond back yet.
click on the link to view more, I do not want to flood this post.
http://i1064.photobucket.com/albums/u371/xbangu/20160526_190348_zpsmc4ibqtl.jpg or copy and paste
I can clean it up but I’m skeptical with out the choke…
Give me a day or so.. I’m gonna go through some barrels. I may have a listone for the std.
Let me ask question…
Who makes a accurate unchoked barrel in .22 caliber for shooting pellets?
Here are some(29) images of the barrel. As for it choked or not, it’s NOT choked.
click on the link to view more, I do not want to flood this post.
http://i1064.photobucket.com/albums/u371/xbangu/20160526_190348_zpsmc4ibqtl.jpg or copy and paste
Is it choked?
My Beeman R9 get much better grouping at 30y.
I was laughing at you guys for the barrels issue, now you guys got the last laugh or maybe you guys feels my pains. It’s karma.
Post some pictures of the Uncrowned Muzzle.
Maybe a quick crown job might freshen it up???
Looks like it was one of Petr’s barrel-less Mutants he purchased and then barreled it with a CZrep he machined. Might just need a little clean up work on the lathe ?
Sold by Steve Smith(was wwag). He posted here and on yellow showing 1 hole 12 shots. Me, as long as 1 hole at 30y who care who make the barrel.
If it just say Czech without showing 1 hole at30y, I wouldnt have bought it.
You can get a bad off of the shelf but normally good barrel in any of them. Could be clipping?
I promised you not to laugh… but I might have missed something here. The Standard Mutant should come with CZ-s200 barrel. Who is the dealer and why was the barrel swapped? :confusedn:
This is a standard with the Czech barrel, not CZ. Barrel is chrome or polished and not crowned. Posted here as a one hole with one mag at 30y shooting 18g out of the tin. Receive back from test, now recommended pellets is now 16g at 950fps and can’t even do dime at 30y.
My Beeman R9 get much better grouping at 30y.
I was laughing at you guys for the barrels issue, now you guys got the last laugh or maybe you guys feels my pains. It’s karma.
xbangu,
This is first time I heard standard mutant is not accurate…and indeed it is not accurate in your picture. It should do one-pellet size hole at 30 yard.
Is this CZ-s200 barrel? It should have 3 dimples on the barrel near receiver end and also a CZub factory mark on the barrel.
- You must be logged in to reply to this topic.
Foxback – sent you a PM.
Dman- for sure I’ll be needing your help with machine work skills.
Thanks