Big Bore airgun blastin at 150 yrds

I will keep this one short as there is nothing to tell really.

OK, except that, my new HP mold is coming along nicely. I had it modified and it was making HP bullets at 287 grs. I found the cavity to be too deep (my fault) and the HP’s were catching major air while in flight and all the weight of the bullet was in the back. I then trimmed the HP pin down, that goes into the mold to make the HP cavity more shallow but stay just as wide. The older pin went down to the second to last bearing groove near the rear of the bullet but since i cut it down, it now only goes to the first bearing groove at the top of the bullet. So know the HP cavity is more shallow and the bullet weight is more centered. But the HP is still WIDE….VERY WIDE. And boy do these things THUMP with authority and the accuracy is MUCH IMPORVED. 1″ groups now at 50 yrds instead of the 3-4 i was getting b4. And the weight went up to 310 grs instead of 287 grs.

Here is a video of me shooting those HP’s at 150 yrds down a closed back road in an area that i frequent. Those bullets and gun still have enough power at that range to SPLIT OPEN a milk jug filled with water like it was only 50 yrds away. What power these modern day airgun have. Its more than my 40 caliber glock shooting hot loads. Believe me, i’ve compared em…lol

Enjoy foks