Cricket Hammer spring adjuster
Hi,
first i must sorry my bad english… but in case…
after week i have owned cricket i started to google around about hammer spring adjuster and I could not find any that would be agreed for my use. So i started to make my own adjuster and after one prototype i do have now several of these adjuster knops, so if someone is interested these i can send it to you. you can use it two ways, first use only outer adjuster, just remove inner bras adjuster and you can use it adjust speed from stock to down. and second using it like pictures you can adjust up and down from stock, especialy when adjusting regulatro higher from stock.
here is some pictures and data.
Data is with proto…
pellet: JSB exact king 1,645 g /25,4 grain
outer adjuster fully out and screwing inner brass adjuster in by rounds
1 round=~ 1mm/speed(m/s)
0/131
1/146
2/161
3/178
4/191
5/205
6/221
7/236
8/251
9/265
10/277
11/285
Brass adjuster fully out and adjusting only with outer adjuster
1 round=~ 1mm/speed(m/s)
0/130
1/147
2/163
3/176
4/192
5/207
outer adjuster fully in and adjusting with brass adjuster
1 round=~ 1mm/speed(m/s)
1/200
2/214
3/231
4/243
5/260
6/277
7/282
8/286
9/289
10/289
11/289
Price for one is 40$ shipped (letter). If you want one, just contact me.[/b]
All Replies
Are you doing .22 versions? If not you need to buy a .22 Cricket as well. 😀
Right on ! There has to be a picking order of some kind … 😎
Single shot tray last proto models…
also these protos leaves to HST adjuster buyers, no extra cost. Just tell me that you have .25 cricket.
one is reserved to Sir Ville…
One of each to me ! 😎 Payment sent.
Prototype tester WANTED 🙂
there is single shot tray prototypes out (not the final quality) and i can send them next five HST adjuster buyer. When you buy HST please let me know that you have .25 criket and i send you one (no extra cost). Prototype material is 10 mm PVC and the product version material comes 12mm POM that is way better than PVC.
Ari
Happy new year Ari and thank you for a very fine product!
Half of the new set is sold!
Happy new year to all, especially all HST buyers!
I have new set these HST adjusters. I make some minor changes this new set. Now there is longer spring support tap, that forces outer piece (black) little bit shorter, also outer pieces knurled section is now little longer so that is easier operate without inner tap.
If interested please contact me, price is in the fist post.
HST adjuster Ver 2.0
Ari
Thanks. I “invested” in 9 21″ all steel birdfeeders loaded with sunflower seeds. It is sparrow heaven (or hell depending on your perspective I guess 😛 ). We are also overpopulated with deer and grey squirrels.
Tack sÃ¥ mycket! It’s getting a bit nipply here at nights down in the upper 30s and 40s. 😀 That will all come in real handy.
Arrived yesterday and will get on its merry way to you tomorrow.
That’s a beautiful property! My bayou is wooded behind me, only not as dense or lush. Bird feeder is up. 😉
Coda – Daddy has something for ya … 😯
Arrived yesterday and will get on its merry way to you tomorrow.
About twenty acres behind me and my neighbors across the hill but the fat lady next door says she will hunt me down if a bloody flopping deer dances across her deck. 😀 :twak: One of my son’s rabbits with an arrow sticking out of it ended up under her deck for a few weeks and started stinking really badly. 😆 😆 😆 She came over with the arrow and handed it back to him with a big mean looking smile. 😯 She actually shoots my guns occasionally but I have nightmares of a deer laying on her deck. We could go into the woods a little bit and probably be ok.
The largest ten pointer I have ever seen in person lives somewhere in those woods.
You can’t see her house in this picture. I supply the guy with the house on the left with squirrels. He loves them. My house is on the right and the lady lives to the right of me. :2:
Coda you don’t have to leave home to hunt. Looks like you several acres behind you.
- You must be logged in to reply to this topic.
Yes i do if i get somewhere one .22 (and .177) clip. Also someone needs to test it.