Cricket Rifle Case
Hey all, need to find a rifle case for the 25 cal cricket. I have been searching and ordered a couple off amazon but none of them have the height. The edgun already comes with a case so that was one less issue I had to worry about (Review between the 25 cal hitters coming up soon). So while my cricket sits in a full sized rifle case I look for something similar like the Edgun case, any ideas where I can find one or know of something of a similar solution? Thanks
All Replies
I bought this Plano hard case from amazon, its 36 inches long, perfect for thE 33 inc Cricket, i really like it, the foam comes already cut to your liking and has a lock too.
Look what I found http://www.evike.com/product_info.php?products_id=31526 or http://www.airsoftgi.com/product_info.php?products_id=5943
This case looks great it has right dimension for cricket standard 💡
O.K. Understood. I got a little scared there for a while…
Dear Sir Vile,
I sew the old fashion way, using my wife!
yuk yuk yuk!!!! (that was a joke!)
Regards,
Kindly ‘Ol Uncle H :twak: t
The Cricket is 33″ long. and this seemed to be functional at 38″ with a storage pocket on the outside. Time will tell.
I will pick up some heavy velcro straps and sew them into place to center the bullpup. This will give me 2.5″ clearance front and rear in the case.
Hoot
Hoot – Don´t forget to take and post pics of yourself while sewing. But keep the clothes on – at least during the photo session. Do you use a sewing machine or do it the old fashioned way ? Are you into knitting too? 😀
Should be in the next shipment due in next week sometime. . 25 synthetic, but I have heard conflicting reports on whether the synthetic stock will be available, or whether only wood will be available. I was told the synthetic stock isn’t yet available in the longer version for the 33″. 25, so I guess I’ll know when it arrives.
Hoot
You got a Cricket Hoot? 😯
Here is what I ordered for a. 25 Cricket from Pyramydair…
The Cricket is 33″ long. and this seemed to be functional at 38″ with a storage pocket on the outside. Time will tell.
I will pick up some heavy velcro straps and sew them into place to center the bullpup. This will give me 2.5″ clearance front and rear in the case.
Hoot
I will buy this one http://ballpolo.sk/puzdra
It is case for over-under rifle.
Dimension 32,6 x 11,4 x 2,3 Inches
It fit for cricket standard as well and it is case for real gun with 0,78 Inches foam ruber with both side. Not like most cases for airsoft. There is max. 0,393 foam ruber.
If you scroll down you see the real price is 19 Euros, they accidentally put a “9” in front of the “19”….
Be interesting to see if it sold…
hi guys it’s possible used the Condor 28″ Rifle Case,in one Cricket standart model?thanks.
Seriously – an Eddie is 19cm high without a scope and i quess the Bug is of a somewhat same height. It would be enough for a scoped EdGun though – at least without that big sidwheel attached so it should fit the Insect as well 😆
All this applies for a std Ed only – the long one is another matter since it´s 89cm long.
If you have the 4″ side focus wheel it will be too tight.
Edgun is kind of heavy – might need stronger straps. 😀
I don´t know about the Cricket since i have a real rifle , EdGun 😉
Seriously – an Eddie is 19cm high without a scope and i quess the Bug is of a somewhat same height. It would be enough for a scoped EdGun though – at least without that big sidwheel attached so it should fit the Insect as well 😆
All this applies for a std Ed only – the long one is another matter since it´s 89cm long.
- You must be logged in to reply to this topic.
Looks like a nice case, rugged. I am looking for something of the softer variety for field use, like the Swiss Arms bag Sir Ville posted up, or even like the one Hoot showed at Pyramyd air. There are plenty of 36 inch rifles cases on amazon but they are all pretty pricey. This is the one that I finally landed on.