Edgun 1897 has arrived…..
No targets or shot strings yet…Too windy and waiting on a Combro Chrony…Gotta go!!!!!!!!!!!!!!!!!!!!!!!!!!! 😯
All Replies
First time I experienced this I was worried about it being a problem but,
no problem with FPS Picudo… I have seen the same result with several
shroud/moderators…. Many of them will cause a shift in POI but do not
effect accuracy…. No clipping… Groups are tight. Only the groups are 2″
lower than without the shroud…. If it is possible, you can turn the shroud
by 1/4″ and watch the POI follow… Could be a small amount of change in
the direction of the air blast while the pellet is exiting the shroud…. I am
not quite understanding the phenomenon.
X2 Always happens when I use a different silencer. Different air volumes and exits velocities etc change the direction of the pellet a tad, enough to notice downrange….
Looks good Mam, What brand is it? I am looking for something for the stock on my Royale bullpup.
Well after recoating the Lelya I thought I would do the same the the
Matador…
This is Truck Bedliner in a can………
Well the weather is cooperating and late this afternoon the wind died
down so, here are today’s groups.
This one is @ 65yds
These are 5 shot groups and they are @ 80yds
Just 3 shots here….
This is 15 shots
First time I experienced this I was worried about it being a problem but,
no problem with FPS Picudo… I have seen the same result with several
shroud/moderators…. Many of them will cause a shift in POI but do not
effect accuracy…. No clipping… Groups are tight. Only the groups are 2″
lower than without the shroud…. If it is possible, you can turn the shroud
by 1/4″ and watch the POI follow… Could be a small amount of change in
the direction of the air blast while the pellet is exiting the shroud…. I am
not quite understanding the phenomenon.
Not that bad. 2″ @ 80 yds. Well I guess it’s enough to make you think WTF? Did you lose FPS? Is it clipping?
Got too excited… Had it painted and fitted in about 30min…lol Just
washer like Delrin baffles, nothing exciting….
What, no pictures of the LDC internals? Mam, you are slipping! 😆
Not sure why but I have had that happen before when adding an LDC…
The POI changes but the groups are still tight… It moved it lower about
2″ at 80yds…
That’s nice 🙂 on the quiet side, how come it changed your POI? Where did it moved to?
It seems to be as quiet as my fully shrouded Rapid and fully shrouded
BSA S10 with addon LDC…. It is quieter than my shrouded Beeman
Falcon Rs with addon LDC….. That probably doesn’t tell you much but it
is pretty dang quiet… I had to put my ear withing 6″ of each gun to try
hear the difference.. I also has to adjust my scope because it changed
my POI…
Overall Length is now 35.75″
Nice!! 🙂
How quiet is it now mam?
Mod addon courtesy of Anthony Storey…..
- You must be logged in to reply to this topic.
Thanks Mam. Guess I got the wrong stuff, Rust-Oleum Truck Bed Coating, figures.