EDgun @ 202yds lasered with Nikon range finder..
I finally found a straight through shot, 200+yds, to test my guns. The
EDgun was the first…. I can’t tell you what a rush it was to hear the
pellet find the 2’X2′ piece of 1/4″ plywood I put out to shoot at…. I shot
this laying on the ground off of the bipod. I can’t imagine how tight the
group would be if it were off of sand bags.. I had the scope adjusted to
full up elevation (155yd zero) and had the 4th mildot down lined up on a
strand of barbed wire that was about 2′ above and about 6″ to the right
of the center of the plywood…There was a light breeze blowing right to
left… It seemed to take forever for the pellet to land once I fired…. What
a blast. The group was 11″ wide and 6 1/8″ tall
All Replies
Gotta love Long Distance! 😀
test
Nice to see it punch through at that distance!
LOL…. It is almost as good as the 155yd with the Cyclone….lol
I was very impressed with the power it had left at that range too….
I think that might be your worst group ever but I’ll give you bonus points for the distance 😯 😀 😀
Nice to see it punch through at that distance!
- You must be logged in to reply to this topic.
That’s awesome to see it punching through 1/4 inch plywood at 200+ yards. I shot at a squirrel yesterday at 96 yards. My drop chart stops at 70 yards so I made a quick guess and held over and into the wind, I missed by several inches but I was very impressed with how hard the pellet hit the rock. I am sure that with a proper drop chart I could kill squirrels with head shots at 100 yards, especially after seeing your pass through shots at 202 yards. Great job and thanks for sharing.
KG