Edgun R3 .22 Just Arrived
Just wanted to say hi to everyone. I have followed this forum for almost a year now, and this is my first post.
Just received my long-waiting Edgun from Tony this afternoon. It came with a well-packed black gun case. The gun has “tiger grains” in both sides of the stock javascript:emoticon(‘:o’). The series # is 0003. It is “Made in Estonia”. I scoped (Hawke HK4030) it right away and sighted it in at 33 yards with JSB RS (the pellets I currently have and are my best pellet for Benj Disco that I shoot with). Trigger is a bit heavy compared to my Mac1-Disco with trigger mod. I only shot ~30 pellets before dark. Will try more tomorrow if weather allows…
Endo
[/img]
All Replies
😯 Very nice!!!! 😉
Will do, Tedd. Thanks for the info, you have saved my time to review the old posts. By the way, would you mind putting me to your list of next O-ring order?
You have been kind enough by sending out O-rings to fellow Edguners. It would be greatly appreciated if you would allow me to join the list.
Regards,
Endo
Endo, try turning the rear trigger screw almost all of the way out and then turn the front screw in until the gun will not cock. Then turn the front screw out till you like the trigger.
You don’t want the rear screw to ever touch the trigger rod linkage.
Thanks Tedd. I have read many of your posts and they are very informative. I remember you have mentioned in some of your posts on trigger adjustment. I will go back to dig them out. I like a lighter trigger by reducing it to 1/2 of the current pull weight.
Regards,
Endo
You’re gonn love it 🙂
LATER
Very nice!
Welcome to the Edgun owners club!
The trigger can be easily adjusted.
- You must be logged in to reply to this topic.
Congrats !!! 😀
Probably a collector’s item some time in future ! Serial no 003 must be one of the first Estonian made ones…….!
Keep us updated please !!! 😀
Cheers from Trygve in Oslo