How to set your reg without a tester for the NUB’s

With this detailed info you will not need a reg setter: I have tried to set my test reg without a setter just going by the AOL in all 5 bar setting and tested with the reg tester and got within under 5Bars of 130b, 120b, 110b, 100b and 85b.—-> Big note this is for the 16disk regulator, a 17 disk will have a 52.88mm AOL for 130B. don’t need the 17th disk unless your going to use 145b + in .25 cal in the 70fpe. 85B your still in the 825FPS range in .177 and .22!

Disk arrangements: (()) (()) (()) (())

These are the reference measurements for the fallowing parts–you can add or subtract to your AOL:

Rotor: 29.22mm

Reg body: 44.48mm

Delrin seat: 20.03mm

Bars in AOL:

130B: 53.80mm

120B: 53.61

110B: 53.40

100B: 53.34

85B: 53.20