I feel it is my duty to tell on myself
First off let me say that this is no rookie mistake…. I have filled airguns
no less than 500 times in the past 3 or 4 months so I am very very
familiar with how things work BUT, Stress can do
crazy things to the mind….I was filling the Sportsman HV after doing
some work on it and the air tube was completely empty.. Knowing how
hot things can get when filling from empty, I was being very cautious not
to fill too fast and cause over heating.. As the gauge started to rise, it
suddenly stopped at 2,200psi for some uknown reason so I started to
open the SCBA tank valve more thinking that I might be running low on
air in the tank…. Well, all of the sudden something in the system
released and the gauge started to climb really fast and I started to panic
at the same rate… Instead of closing the valve on the SCBA, I continued
to open it thinking that I was closing it…. Well fortunate for me, my
SCBA only had 3,500psi in it so that is where the gauge stopped… I can
not tell you how un-nerving that was ….. As embarresed 😳 as I am
to tell this story, I figured it may be a reminder to all that handling High
Pressure Air takes patients and 110% of your attention 110% of the
time…. Things can go really bad really fast and you may not be as
fortunate as I was if it does….. I am off to Walmart to restock my azz
wipe Inventory…. 😯
All Replies
Mam, You could have bought a lot of your favorite Azz Wipe for that but it wouldn’t make a down payment on plastic surgery or a coffin.
Wise purchase.
None of the rest of their equipment looked chicken sh*t either!
Yes ?
You’re a slick one YN….lol
Internet Ninja Skills….
Yes ?
You’re a slick one YN….lol
Yes ?
my
Simple, elegant, and to the point …lol
Simpler and more to the point if he’d got it right in the first place 😀
my
lol ?????
Insert the “my” into the sentence –
Very thoughtful of you to turn it off dude, but I was only joking about having a fit. It was very mesmerizing is all. 😀
LMAO I thought my pc just wasn’t displaying it properly anymore!!
I would probably get one except knowing me, I would eventually duct tape the handle back so I could go and do something…. 😯 😆
No, I can let me avatar loose on ya if I need to…lol.
I will only be using the fill station to fill guns so it is only a couple seconds
to get that done… No time to run to the water closet to use the lieu.
LMAO I thought my pc just wasn’t displaying it properly anymore!!
I would probably get one except knowing me, I would eventually duct tape the handle back so I could go and do something…. 😯 😆
LOL…. I am just trying to ensure that I will continue to be a
2 handed girl in the future….lol
Don’t make me turn my avatar back on….
prevent any more accidental over charging… It does not regulate how
much pressure is allowed through but, it has a spring loaded valve
handle that will close the valve automatically when you let it go…
You big scaredy girl….. 😆
I ordered this filling station from http://www.Sheldensportinggoods.com to
prevent any more accidental over charging… It does not regulate how
much pressure is allowed through but, it has a spring loaded valve
handle that will close the valve automatically when you let it go…
PRESSURE GAUGE WHEN FILLING ( TANKS ,BOTTLES, ECT.) The woman
at the dive shop told me last time I was there. I think she likes ME ?
Take Care, Bob
Or, you were in the way 🙄 😆 😆 😆
?
my
lol ?????
- You must be logged in to reply to this topic.
Wise purchase.
None of the rest of their equipment looked chicken sh*t either!
Very true LURKER #1. What good is a wipe with no wiper to wipeth with
nor eyes to see when it is clean. lol
James’ equipment is great… That is where I got my compressor… He is
an HPA wizard….