just some condor numbers, 24 and 12 inchers
2800 psi to start with both barrels, top hat…. yep right about there ❓
All tests done with Kodiaks
24 incher…………………………………12 incher
1083 – 8.9………………………………..201 – 304 😯
1096 – 7.9………………………………..720
1076 – 6.9………………………………..734
1025 – 5.5………………………………..903 – 8.9
1050………………………………………889 – 5.9
1078………………………………………895
1078………………………………………881
1083………………………………………894
1067 – 4.10………………………………892 – 7.11
1065 – 3.13………………………………885 – 6.9
1065………………………………………874 – 5.9
1057………………………………………864 – 3.11
1070………………………………………868
1070………………………………………858
1073………………………………………850
1065………………………………………845 – started raining again 😈
1057
1057
1045
1034
1037
1024
1006
1002
995
993
981
977
973 end pressure 1900 lbs
what do you all thin, and what is everyone else getting, especially with the 12 incher
All Replies
doing that just wastes air and I’m not into cutting the spring, it was there before I’ll get her back there
I was fling some air coming out the wheel slot, so I’ll take a look at the breach and probably polish things up again.
Jack the powerwheel full, with 2900psi, and chrony, then if it shoots over 1150 cut some of the spring off, till you can get in that range.
I don’t use the 24 incher any more, I just put it on to see if it is shooting right, it’s not, she is shooting slower than she usually dose and she’s jumping all over the place 😥
I want it to be in the 900reds with the 12 incher and in the mid 1100reds with the 24
if there is no p/w number next to the speed then it was still set on the last number
You need to drop that power to around 1040 to start with on that 24, what is the power wheel set at if 0, turn the top hat down
- You must be logged in to reply to this topic.
What pellet you gonna be shooting at 1100 fps!!??
I want some 😀
Also, surely adjusting the power wheel during that string has queered the results?