All Replies
Vertical shot analyst, could be caused by simple technique error. Usually back of the stock related, not position/pressure the same way on your shoulder. If you are using a bag on the back you could be fighting with it when positioning the POA.
Looks like you have a bit of POI shifting also. You might want to check if you haven’t already the frame torqueing and barrel pulled forward .5mm off of the receiver also. Which all have been discuss here on TAG.
just my 2 pennies ……….
~ GKU
octavius, good investigation. Cricket barrels were really shitty here in Poland and KalibrGun said that they were good. They did not offer any replacement.
Guys, this gun really outperforms the shooter. I maybe shot 500 pellets in my whole life. There is about 3 m/s deviation between the fastest and the slowest shot. The second thing is that the pellet should be selected among different types and matrices. The last thing is that the groups are more or less similar to the groups which were obtained by Ted and Ed with Matadors. You can see the comparison.
I think here are some answers:
http://www.talonairgun.com/forum/viewtopic.php?f=33&t=30174&p=304045#p304045
http://www.talonairgun.com/forum/viewtopic.php?f=33&t=29549&p=298382#p298382
I agree there is too much drift for my taste. Pellets need to touch each other in my opinion at 50 yards.
Sent from my Z10 using Tapatalk
May I ask what was the motivation behind changing the original barrel? My experience with the original stock is very good and was doing 3/8″ at 50yards before any tuning and out of the box (aside from barrel cleaning). Is this related to the barrel problems in Poland reported several months ago?
Someone was suppose to be coming out with an adjustable butt plate, But I do not think it will look as good as your plate.
Mike
You can make your stock barrel look exactly like that one. Just remove the bluing and polish the thing. I´ve done that on two Crickets already.
Nice looking PLB ! You seem to get a fair amount of vertical spreading. Have you Chronoed the gun ? I mean it could be due shifting velocity and in that case you can tune it for much smaller grouping.
The barrel is Lothar Walther choked and the shroud is made from carbon fiber.
The butt pad was made in Poland by AirgunsDomar.
If you want to buy some butt pads I can help with that. They are really top quality. The good thing is that you can have different bases with rods so that you can use the same but padd on different rifles.
Nice looking gun, That barrel does not look stock? What kind is it?
Someone was suppose to be coming out with an adjustable butt plate, But I do not think it will look as good as your plate.
Mike
There is no problem with the removal. The OEM butt pad is just glued with some poor quality substance. You need to pull the rubber a little bit and you also may need to use a scalpel.
Indeed, there are some screws placed between the stock and the white plate. However, I decided to leave the white plate untouched. It looks quite pretty with aluminum.
Yes, nice Olympic style butt pad ! 😯
How did you remove the OEM butt pad, some say there is a screw ?
~ GKU
That one is CNC machined by a professional craftsman.
Nice, is that your home made butt piece?
- You must be logged in to reply to this topic.
Could very well be that as well. I asked if he had chronoed the gun to start from the basics. At 50 meters just a 3-4 mps drop in velocity changes the POI quite an amount , vertically.