Mag loading made easy-er with Oring
I for got who told me about the oring might have been Zonk..
But just replace the two orings on the mag with one from the O ring store.
Model N2.50X27
2.5mmX27mm Buna-N70 o-ring
It keeps the mags from falling out when trying to reload…
Just passing it along , Its helped me out,,,
Thanks a lot for who ever told me about this,, (Zonk)
Mike
All Replies
Zonk told me about the O-ring change a month before I got my Cricket 22, And I ordered the rings and forgot about them ,until my mags fell out of the gun a couple of times.. Then the memory kicked in
Thanks
ZONK,,
It will ! It needs a bit manhandling though. Are you up to the task ? 🙂
I tried this oring size but seems not to fit in place
Don’t know but it sure works nice…
That’s a beef o-ring, it makes me wonder why they couldn’t wrangle that one at the factory ❓
Here’s a picture with the REPLACEMENT o-ring….
here’s a picture with the rifle standing up, mags NOT falling out…
we all know what a pain in the ass it is when your mag holder falls open and a mag drops to the ground….this will keep your mags from doing that…
and yet another with rifle standing up…
It’s not about holding the pellets in place. It’s about holding your mag in the mag holder WITHOUT the mag falling out every time you open it.
That my friends is what it’s about!!
Zonk
Yes… Yes I did, Shirley Squirrel Porker..
Did you just call me Shirley?
Upon closer inspection, (in better light with my glasses on), there are indeed o rings on my mags. 😳
An easy task .. :ugeekn:
surely your mags look like this? the o rings hold the pellets in place..
if YOUR mags did not come with Orings someone one sold you some bad mags
Do your mags just fall out when you tried t0o load them?
Mike
Buy the ORINGS THAT ZONK POSTED.
Dave
At the risk of asking a dumb question, I do not understand this thread about O rings and mags. I don’t see any o rings on the 5 mags that came with my used cricket. Can I get a pic of what exactly you are talking about? Thanks!
Dave
it’s like trying to wear out a condom….
- You must be logged in to reply to this topic.
😀