Mag loading made easy-er with Oring
I for got who told me about the oring might have been Zonk..
But just replace the two orings on the mag with one from the O ring store.
Model N2.50X27
2.5mmX27mm Buna-N70 o-ring
It keeps the mags from falling out when trying to reload…
Just passing it along , Its helped me out,,,
Thanks a lot for who ever told me about this,, (Zonk)
Mike
All Replies
I’ve got the o-ring kit from Ernest but holding out to see how long the factory ones last.
Yes it’s thicker, you don’t need the two O-rings that’s on the mags. The new o-ring will keep the mags from falling out everytime you open your mag holder.
If your waiting for the O-rings to wear out you’ll probably be dead before they wear out.
Zonk
Good memory Mike…I also had to put a small channel under the mag because the o-ring would drag on the receiver. Put a little silicone grease on the o-ring and it’ll slide into the mag holder easier.
Zonk
Yea the new Oring is thicker, Real cheap to it just helps hold the clip in place,, One of the best things I have done so far except maybe putting a scope on it..
Mike
I just point the gun down when changing mags. Is the new o-ring thicker?
I’ve got the o-ring kit from Ernest but holding out to see how long the factory ones last.
- You must be logged in to reply to this topic.
:rofl: :rofl: :rofl: Thanks.