New High Performance Quick Change Tophat From TalonTunes

Your gap looks bigger because you don’t have a spinloc gun my power wheel was on 12 and fill was at 3000psi you will just have to play with the gun a bit

–edit–
NOTE: The problem is with my rifle. There is nothing wrong with Tonys design.
–end edit–

Ok I guess that proves something is wrong with my valve.

The tophat does not seat nearly as deep for me, my gap is so far out I cannot rotate the bolt left or right.
With no restrictor my velocities match yours, but using the restrictors I am well below what you are getting.

When I compare my stock valvestem to Tonys new one, Tonys stem is quite a bit longer. –EDIT– This was a misperception on my part. The stem is the right length, just designed a bit different. –End Edit–

Ill see if I can gets some pics up later, probably tomorrow.
Here is a photo of it installed, but not a good closeup. Shows the large gap I ended up with though.

Tony I emailed you earlier today about making bigger restrictors, but maybe there is something else up?

Thanks guys i try i should make a bloopers video for all my mess ups lol ive been so swamped lately and had promised Tony i would get this video done. The next video will be the T.T.T.A.

I like your videos. I did allot of shooting today in the wind. I am finally getting close to be done moding my guns lol.

If I install this quick change top hat on my standard tank would there really be any change? I am more than likely going to put it on my spinloc high flow tank. Just wondering if it would held the standard until I get my valve removable tool. Been waiting 2 weeks now……lol

I have poste some data under the Condor section from my TT tophat purchase.

😯 That is one impressive Shot String! 😯 Tony really is “The Man!” 😀

KnifeMaker

Well I have been looking into a regulator for my AAA condor and first decided to try Tony’s new interchangeable top hat. Wow I would have never expected the results. I have a AAA condor from Tony that shoots EnJin 43.2 pellets on power wheel 12-10 at 1014 FPS (3000PSI), or (98 ft-lb). At power wheel 10-0 it shoots 998 FPS (3000PSI). So I installed his new top hat with the largest opening and here is the shot string.

PW 10-10 EunJin 43.2

778–3000psi
786
786
793–2900psi
794
796
796
795
797–2800 psi
800
800
799
796–2700psi
801
802
803
806–2600psi
802
803
800
799–2500psi
796
801
797
799
798–2400psi
798
793
793
792–2300psi
789
787
787
782
779–2100psi

That is 35 shots at almost 60 ft-lb.

Continuing:

776
775
774
774
769–2000psi
766
759–1950psi

So now I am curious of ordering extra inserts from Tony to drill each one out a little more to see what shot count I can get in the 70 ft-lb range.

It never stops with Talon Tunes!!! O and I just got a new credit card that my wife does not know about so watch out Tony I can feel a new build coming soon.