New to EDgun R3 0.22 Std
Here is a few of pictures of mine,
Unboxing,
❓
🙄
🙄
❗
and will pick up some knowledge from everyone here,
Thanks
All Replies
Thanks guys for the inputs. I did another tune on my gun. It runs much better now, here is the latest curve,
SD is 2.93 for the first 43 shots, I would expect 130 shots from 230bar down to 96 bars. The issue is that the regulator was pre-set too hot, I have to give it 1/4 more CW turn. For details, please refer to the link below.
Yes, CW will give you a lower regulator setting.
Was this the first (only) time you filled up with air and shot a string after turning in the reg?
Maybe the reg needs to settle a bit… shoot some more and make sure you shoot to 90 bars or so.
Q
OldGoat,
I thought my tune, CW turn to 3.5o’clock, would lower regulator setting down from 130bar, am I wrong? How can remedy or smooth out that kind of volatile?
Thanks,
The reg is set at 130 bar. If you shoot below 130 bar, the shot sting will go to hell.
My gun got tuned over weekend, and I got an interesting curve between 140bar and 85bar, any explanations about the instability around 117bar?
Here is a 5-shot outdoor group @44Y today, I know this gun can do better than this,
I have reviewed the clips in slow-mo, shots are good, just a little windy.
When you consider what a Harris Bipod cost then add in cost of swivel base to make it more useful your getting close to price of bolt-on Atlas but still only a tiny portion of adjustability. If you hunt the Atlas is invaluable due to its numerous combinations of leg positions.
They do look good but the price hurts
Those Atlas BP sure look good. I quess they work as well as they look ..
Put this on over the weekend,
😀 😀 😀
Some details can be found in the following, thanks for the information from everyone on this forum.
Yea I’m going to do the bank transfer being that I can just walk to the bank he has and deposit it straight into his account..that way he has the money immediately and when the gun is ready to ship it gets sent out ASAP no waiting for money to clear.
He sent mine out the same day as I emailed him a photo of the receipt. I should mention he said he would wait until the next day (after it cleared his account) before he shipped it.
The bank transfer usually goes through in full overnight. 😉
So it is faster than snail mailing a mo. 😀
Since he is likely dealing with a bunch of people I just let him dictate the best path for shipping and letting the payment clear. I may see if I can pay a bit more for overnight or two day shipping on this one. 😉
Bank transfer took about 1hr before Tony emailed me that the funds were deposited to him from me. He emiled about an hr after that with tracking number for shipment. Quick and simple.
What’s quicker…if I mail a money order to tony it takes 2 days from we’re i am…how long does a bank transfer take….cause if a bank transfer is like an instant thing than ill go that route.
- You must be logged in to reply to this topic.
For my tune #6, I have just done my scope calibration up to 91Y. Surprisingly I found ChairGunPro is wrong totally on the reticle reference map at 32X, but the click number out of it is good enough in my test. For details, please refer to my blogger linked below. I guess everybody need to do the same thing for your gun.