Over 200+ shots from my 1350 psi reg setup
Today I started counting my shots and was surprised at the number.
My 1350 psi regulated tank started at 3000 psi and shot over 200 times til 900 psi remained. This was using my 18 inched .177 barrel shooting 7.9 gr CP pellets.
Not bad for 1 refill 🙂
All Replies
Next thing you’ll see is a screw in regulator for a std tank.
😉
the power wheel doesnt effect the CO2 adapter. it’s always fixed power and regulated to output 1350 psi.
7.9 gr .177 pellets shoot at 930 fps and 14.3 .22 pellets at 830 fps.
Wow! over 200 shots from that tank!? thats impressive, at what power setting?
I was just measuring mine:
NitroDuck 45ci 4500psi (made by Luxfer)
tank alone is 8.50″ overall, 3.50″ diam nominal, 3.547 actual
tank + regulator (Nitro Duck) is 10.25″
tank + regulator + AirForce CO2 adapter is 14.625″ to shoulder of thread
Here are some pics. Scope is a Leapers 8-32×56 mounted
on an AirForce trirail and Accushot one-piece high mount.
Height isn’t the problem. Overall length and current lack of a buttpad is.
[/url]
It is a bit tricky looking over the fat tank, but not too bad.
The tank is carbon fiber and the size is 45 CU which can be filled to 4500 psi.
It’s not too heavy either. I bought it used from a paintball shop over the summer. It’s nice because of the built in gauge and refill nipple. The tank fits well with the CO2 adapter from Airforce.
sirjeigo:
Looks like an interesting set up!!
How well can you see over that “fat” tank? Is sighting Hard?
What size tank ? How many cubic inches volume? What diameter?
Is it 4500 psi? Looks like carbon fiber, Is it light weight?
Mark
- You must be logged in to reply to this topic.
1 Comment
-
Pingback: мостбет казино вход
😉
They use to be made for paintball. One of you genius needs to develop a reg that a screw in model.