SAW’s 1 piece laminate stock ////////COMPLETE////////
got a few spare moments to start my laminate stock for the super talon 😛
I decided to go with a one piece stock with a bottle supporting set-up 🙄 🙄 🙄 🙄 🙄 🙄
I kinda hacked it, just cause I have two more blanks glued up, so this one is kinda an experiment.
I just went ahead and ran a 1/2″ x 3/4″ dado all the way through, next one I will get a bit more precise with it.
Where the bottle rests, the dado will go away as for I plan on doing a radius dado, 🙄 🙄 , the bottle will rest on it.
Trigger guard will be part of the stock, SAW butt, will also be carved into the works.
WOK makes some great parts for these guns and is truly the king when it comes to design and after market goodies, I have them all.
However, I am gonna give the grip a cant forward a few degress/ more straight up and down like.
Prob. an old skateboard injury, IE broken wrists, that made me do a little tweak with the grip angle.
Now the following pics. are just rough cuts, lots of sanding and grinding to follow 😀 😀 😀
I bought one of those Rigid oscillating sanding table thing a ma jigs, that should come in handy.
I will keep all you guys up to date with the progress
Later-
SAW ❓
All Replies
That does look familiar. LOL
http://talonairgun.com/forum/viewtopic.php?t=1580
Your gonna love it when your done. I eventually sawed off the rear portion with bottle support. It added too much weight to the gun, and with the wokbutt I think it shoots better without that extra wood.
Hey, that looks familiar… I knew i’d seen it somewhere… Just can’t remember where…
😆
http://talonairgun.com/forum/viewtopic.php?t=7054
That was my first laminate stock. There is a lot I would change, the butt end didn’t work like I had planned. It works some, you can hold it some with your bicep and pectoral muscles when shooting off hand. It really needs to be a FT hook to prevent the barrel from pointing down.
Check out the cheek rest and do something similar. I think that pushing against the tank with your cheek can tweak the frame and throw off accuracy… Same thing with too much torque on the screws that hold the action to the stock.
I wish stock duplication was cheaper. I’d get into making a few different mass production stocks for the af rifles… 😯
For a prototype and I will be happy!
each one you will get better, looks like a great start!
I like the idea of solidifying everything.
DANGER!!!!
Do not watch porn while using power tools!!!!
Lol!!!
Don’t worry about the dado in the back. When you cut it down for the tank it will go away… 😉
Your gonna love carving that stuff… 😯 😆
- You must be logged in to reply to this topic.
I have to somehow put a 1 1/4″ radius where the bottle rests
I could clamp a scrap piece there and bore it
would have to buy a bit extension
however I would like the channel to neck down like the bottle
Gonna see if I can find a router bit
checked Rockler, no dice
I will get online tonight
May just have to use the front wheel on my belt sander
Mrs SAW is gonna be out of town this weekend
gonna do some milling on it
progress pics to follow
Later
SAW