Spare tank options.
Hello all,
Thinking about getting a new tank for my condor for plinking when I am working on my high flow valve.
Mostly in the winter when raccoons are in hiding. I dont really need all that punch to take out smaller pests.
Thinking about a standard flow tank, just have to take out the hammer weight right?
How about micro meter tank or running on co2- dont have an adapter.
What would be the most accurate, consistent FPS, and what FPE could be expected from each?
.22 condor, 24″ barrel.
Thanks 🙂
All Replies
if climate is regularly upward of 60f or so where you are, co2 is the way to go. hundreds of shots at a self regulated pressure at a given temp. if hpa is the only option cause of the cold, a detuned standard flo or micro meter is the way to go…
The Std flo tank is not going to pack as much whallop as the Hi/Flo tank, I can only tell you what results I had with my TSS
Std valve and stock hammer 12in/.22 815 fps
Std valve and Hammer 12in/.25 680 fps
Std Valve w/ 95gr Hammer 12in/.25 735 fps
Hi Flo Valve w/95gr Hammer 12in/.25 920fps
😕
- You must be logged in to reply to this topic.
[quote=”Harryparatestis”]The Std flo tank is not going to pack as much whallop as the Hi/Flo tank, I can only tell you what results I had with my TSS
Std valve and stock hammer 12in/.22 815 fps
Std valve and Hammer 12in/.25 680 fps
Std Valve w/ 95gr Hammer 12in/.25 735 fps
Hi Flo Valve w/95gr Hammer 12in/.25 920fps
Harry that SS in a .25 sounds sweet, and packs a punch.
What pellets are you using for those numbers.
Lets see a pic.