Thanks Guys

well….

I Been pulling my hair out trying to get this dang condor to shoot. I took a file and cleaned up all the sharp edges that were tearing up the hammer then I polished the barrel where the breech rides. the hit the inside of the frame with some flits. Everything was finished,just waiting on the Hammer.

I had it in pieces and decided to wait for the new hammer from tony + the supersear… well it got the best of me when UPS dropped off my 90 Duro orings for the breech i just couldn’t help my self.

I changed out the stock AF oring with the new ones…. put everything back together and started tinkering with it across the crony..

Running it with the TT 3piece top hat large restrictor

kinda rough tune right now but I’m really happy with it… i filled it up to 3000….. started off at 856

took about 6 or so shots to climb up to 870 -890 range where i got about 30 shots in that range. Tryin to save some pellets. waiting on them too

Its looking really promising and I’m happy i tossed it together tonight.

Thanks to all ….

80-grit

Participant

January 14, 2014 at 3:03 am

quote tcmalker:

quote dman1114:

to.

What are you crazy? Filling all the way to 3000? You want to blow your gun up or something?

I once sent a 6 year old air force tank out for hydro testing. I believe they fill it to nearly 9000 psi. It passed the test and I laid my face on that tank for two years afterwards. Yes, 3000 will not be ideal with his set up, but by no means dangerous 😉

ldp

January 14, 2014 at 2:56 am

Its not about blowing up the gun and if you were a little smarter or knew something about tuning you would be able to recognize the wasted air by filling to 3k. He should be filling the tank only to the point where he started hitting 870 fps and not waste the shots and air filling to 3k. I figured someone with youre knowledge and expertise would already know that.