Ordering R3M parts
I tried to send an email to Ed through here, but the msg has stayed in my outbox for days. Sorry I post it here.
I really like my new R3M .22. I’m afraid to wait too long just in case of any parts wear out.
I’d like to order the following parts for R3M .22
1 regulator
2 valve stems
2 sets o-rings,
4 alum or plastic megs.
Let me know how to do it.
Thanks
Charlie
All Replies
Bump.
Please put me down for 1 in .22 R3
Put me down for 3 valve stems for R3 25.
Might as well stock up a few more in case I ever need them for the hotter tuned 25.
So far still fine after 13k but ya never know right?
Will pm address
This order is good only for Valve Stems. No problem if you need a whole valve, instructions for that part are below.
If a full valve assembly (the whole valve mechanism) is needed, you need to contact Tony directly and make arrangements for that part.
The only reason for the valve stem orders is that one piece in the valve assembly is prone to break, sooner or later, and that is the valve stem. By placing a group order of valve stems, we will more likely be moved to the top of the “I WANT…” list, and have a greater possibility of receiving the parts in a timely manner.
I’ll wait until next week for any late comers, then I’ll contact/post payment options after I get confirmation of the full price/shipping from Tony.
I suggest sending me a PM with your mailing address so I can begin to compile a mailing list for Tony when the parts are ordered.
H 😯 😯 t
Hi Hoot, could you put me down for:
2 valve stems for .22 R 2.5
Many thanks!!
Ok guys I need a little defining here. I see some ordering valve stems and I get that but what all in tells a “valve assembly”. I have heard of a few stems breaking mainly in the .25 edgun but don’t know if I have heard of anyone needing a valve assembly. I have already put an order in for valve stems other wise I would have jumped in on this here group buy. I too am looking to get a few tools and parts cause my eddies are not going anywhere soon! They have consumed all my shooting time, except for a springer now and then, while all others have taken up permanent residence in safe. Enjoy
Hoot, please put me down for the following:
1 valve assembly for R3 .22
2 valve stems for R3 .22
Thank you very much, Mike
I’ll take one for a R3 in .22.
Thanks for doing this.
One valve stem for the .30 cal, thx Hoot!
I’ll take:
1 for 22 R3
1 for 25 R3M
Thanks Hoot,
Clint
two valve stems for a .25 cal R3 please 🙂
Gabe G.
Unless Ed or Tony posts something, I’ll total all this up in a week or two and give Tony a firm order.
Details, if needed, later….
H 😯 😯 t
😆 😆 😆
Perhaps y’all could post your grocery lists here too… 
Ed needs to send Tony 50 of each size (if they are different) with the next batch of guns/conversion kits delivered. Shit i’d buy a few for my 177 standard.
I would purchase 1 complete valve assy, for each of my .22 r3m, .25 r3m, .30 r3. Also 1 spare stem assy for each gun as well.
- You must be logged in to reply to this topic.
I understand the issues with some if the expensive parts requests, strike my valves in that case and i want 2 valve stems for each of my .25 and .22 R3M’s and my .30 caliber.
Thanks Hoot