Q:

2nd Edgun R3M Has Landed In Iraq

hello guys,,,

after been trying more than 2.5 months finally this time i could import an Edgun R3M .22cal STD for my friend,

Monday early morning the rifle landed in airport in my X-city … and i was not there ,, my Father-In-Low went and after 3.5 hours could to get it out from the security and custom department and section,,,

i ordered everything for my friend and also some thing for mine,,, like a single shot breech and spare air valve rod,,,and some edgun pellets ,,,

the rifle came in a very good wooden box as usual…

then i loosened the screws and start opening the box and all ,,,first took out pellets ,,,

then the Edgun ,,,wow,,,what is the beautiful walnut stock,, ,,, my uncle Eduard,,, i want the same for my Edgun as well,,, i am happy that my friend will get such a nice stock,,

2 air valve spars ,, nice wrapping ,, Eduard has sent me as a service part and i haven’t paid for these,,, thanks Ed,

a huge o-rings and set screws ,,,i haven’t paid for that as well ,,,, thanks Ed,

i was wondering to know what is inside this envelope????

it was an Edgun T-Shirt gift from Eduard,,, thanks a lot eduard,,, the size is perfect and i am thinking from where you got my size????

2 single shot breeches ,,, very nice and i will try to spot the differences between R3 & R3M …later ,,

7 spare mags ,,, these mags are all aluminum,,,

and the gun has a mag accommodation and it is R3M

and testing started ,,,gun came with 190 bar fill,,,

and i am happy that the stock also has two screws ,,,

my Father-In_low was checking the target results,,

below target is one shot at 48.5 meters and after scope zeroing,,, the gun/barrel is not cleaned ,,,just took out from the box and shot ,,,

i will post more details in next few days,,, i will try to get more details ,,, but i took 50 shots from 205 bars down to 135 bar ,,,the first shot was 910 FPS and the 50th shot was 855 FPS ,,, which is not good for me… i will try to fix the shot consistency by adjusting the HST ,,, and let see what is the result,,, 🙄 🙄

thanks for reading ,,,

EdGun

All Replies

Viewing 15 replies - 1 through 15 (of 46 total)

1 2 3 4
quote Hemn:

Hi Hemn,

I just stumbled on your post.

😯 OMG !!!!
That is the nicest looking Matador stock I’ve seen so far !

This is how I check my shroud if it’s centered :
http://talonairgun.com/forum/viewtopic.php?f=33&t=31366#p317041
http://talonairgun.com/forum/viewtopic.php?f=33&t=31366#p317043

Hope that helps ~ GKU

my dear brother , In addition, How much is the inner diameter of silencer (edgun),6.5mm or 7mm ? or else ? thanks

quote gaucho:

Cool !!!! in Brazil also have few Edguns. Some more time I’ll have mine R3m hahahaha :whistle: .
What is the situation in Iraq brother Hem?

my dear Brother ,,,

Situation in Iraq is not good still, may God send these shit guys (ISIS) to hell ASAP,

in our part (Kurdistan) our special force are fighting with them hardly , and we are keep going forward and getting back our lost lands ,,,Thanks for God,

but still the situation is bad,,,

i have my 3rd Edgun on the way to iraq for another friend …hopefully i can get it without any problem … Inshaallah .

Cool !!!! in Brazil also have few Edguns. Some more time I’ll have mine R3m hahahaha :whistle: .
What is the situation in Iraq brother Hem?

quote Hemn:

Brother Bruce…

Sorry I haven’t tried any silencer yet… and I haven’t tried shooting without the shroud barrel. .because it is not allowed in my area. ..

thanks , In addition, How much is the inner diameter of silencer (edgun),6.5mm or 7mm ? or else ? thanks

Brother Bruce…

Sorry I haven’t tried any silencer yet… and I haven’t tried shooting without the shroud barrel. .because it is not allowed in my area. ..

quote Veerkracht:

Clipping test:
In order to test the edgun without the silencer you’ll need to get a M12X1,25 (MM.) nut.
Unscrew the baffled end and screw on the nut.
You poi will shift every time you unsrew the barrel construction.

Regards, Robert.

thanks

Clipping test:
In order to test the edgun without the silencer you’ll need to get a M12X1,25 (MM.) nut.
Unscrew the baffled end and screw on the nut.
You poi will shift every time you unsrew the barrel construction.

Regards, Robert.

quote Hemn:

quote kingbruce:

hey my brother, please help to do a test. on the edgun, install silencer and Do not install silencer , will Change the trajectory or not ? thanks my brother,,,, distance 25-30 meters will be OK ! thanks

Brother ….which silencer do you mean?? the Edgun shroud ?? or the other silencers that guys in USA installed??

i
want to do a test, with and without silencer , if the zero point change or not ? just to see whether the silencer Effect of original trajectory…thanks , In addition, How much is the inner diameter of silencer (edgun),6.5mm or 7mm ? thanks ,can you Use vernier caliper to measure … thanks my brother

quote kingbruce:

hey my brother, please help to do a test. on the edgun, install silencer and Do not install silencer , will Change the trajectory or not ? thanks my brother,,,, distance 25-30 meters will be OK ! thanks

Brother ….which silencer do you mean?? the Edgun shroud ?? or the other silencers that guys in USA installed??

hey my brother, please help to do a test. on the edgun, install silencer and Do not install silencer , will Change the trajectory or not ? thanks my brother,,,, distance 25-30 meters will be OK ! thanks

Dearest Brother BowLao,,,

my Edgun is R3M originally,,,, but in the middle of this year i got my SS breech and some service parts and mags ,,, that i ordered with the Edgun ,,, ,,, ,,, for all summer days my Edgun had SS breech,,,,now i converted to MS breech,,, ,,, ,,,

my SS breech is really smooth and easy to cock ,,

may God help you to get your dream Edgun one day ASAP… amin ,,

quote BowLao:

My dearest brother Hemn,

I am so envious of you to own such a beautiful SS Edgun Matador of my dreams. Now all the live targets are even more nervous for sure. You now only have one commitment with the cross hair on your target. You have that one shot kill in you mine.

Beauty is simplicity my brother and your single shot Edgun Matador is simply beautiful.

My dearest brother Hemn,

I am so envious of you to own such a beautiful SS Edgun Matador of my dreams. Now all the live targets are even more nervous for sure. You now only have one commitment with the cross hair on your target. You have that one shot kill in you mine.

Beauty is simplicity my brother and your single shot Edgun Matador is simply beautiful.

quote Sniperqty:

Congratulations my friend

أرسلت بواسطة iPhone بإستخدام Tapatalk

Thanks a lot brother SQ,,, i do appreciate it,,,

now in whole Iraq a friend and i have Edgun ,,, only 2 Edguns in Iraq,,, LOL ,,, :biggrinn: :biggrinn: i haven’t heard anyone has EDgun yet..

Congratulations my friend

أرسلت بواسطة iPhone بإستخدام Tapatalk

Viewing 15 replies - 1 through 15 (of 46 total)

1 2 3 4
  • You must be logged in to reply to this topic.