Complete Oring List
Anyone have a complete oring assembly for the Edgun Matador? I am sure things will last for some time I have replaced the bolt orings when I got my gun but just curious if there is a list someplace of all of them thanks Eddie
All Replies
All Edgun O rings are best replaced with Nitrile-70 compound and lubed with 100% silicone grease.
O rings are measured in millimeters first by the internal diameter and secondly by the cross section thickness.
All O rings in Edgun are metric sizes apart from the 2.57 х 1.78 (005) used in the fill valve and R3M Cam tensioner.
Leshiy O rings
2.57 х 1.78 (005) -1pc fill valve
5 х 2.5 -1pc Manometer
5 х 1.5 – 4pc Fill probe, Regulator piston and Regulator adjuster screw
8.5 х 2.5 – 1pc Breech
9 х 1.5 – 1pc Regulator piston
12 х 2.5 – 1pc Regulator to plenum
18 х 2 -1pc Regulator plenum to valve body
18 х 3 – 2pcs Rear cylinder plug and outer regulator
29 х 1.5 – 2pcs stock magnet collar
29 х 2 – 1pc Moderator end cap
Lelya O Rings
2.57 х 1.78 (005) -1pc fill valve
5 х 2.5 – 1pc Manometer
5 х 1.5 – 4pcs Fill probe, Regulator adjuster screw, Regulator piston
2.5 x 1 -2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) – 2x Breech
9 х 1.5 – 1pc Regulator piston
18 х 3 – 4pcs Regulator, valve body and cylinder front plug
19 х 2 – 1pc Moderator
Veles O rings
2.57 х 1.78 (005) -1pc fill valve
5 х 2.5 – 1pc Manometer
5 х 1.5 – 4pcs Fill probe, Regulator adjuster screw, Regulator piston
2.5 x 1 (.177) 3 x 1(.22) – 2pcs Breech pellet probe
9 х 1.5 – 1pc Regulator piston
18 х 3 – 4pcs Regulator, valve body and cylinder front plug
Matador R2.5 O rings
2,57 х 1,78 (005) – 1 pc (front plug filling valve)
2.5 x 1 -2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) – R2.5 and R3 Pellet probe
9 х 1.5 – 1 pc Rear of the regulator piston
25 х 3 – 4 pcs Front and rear cyl plugs, regulator/valve body
5 х 2.5 – 1 pc Pressure gauge
5 х 1.5 – 5 pcs Front of the regulator piston x1, regulator adjustment screw x1, .22cal transfer port, x1, fill probe x2
7 x 1.5 – 1pc Barrel to breech
Matador R3 O rings
2,57 х 1,78 (005) – 1 pc Front plug filling valve
2.5 x 1 -2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) 5.1 X 1.6 mm or 008 (.30 Gen 1) – Pellet probe
7 х 1.5 – 1 pc Gen 2 .30cal breech
20 х 3 – 1 pc Gen 1 .30cal front regulator body
9 х 1.5 – 1 pc Rear of the regulator piston
19 х 2 – 1 pc Suppressor seal
25 х 3 – 4 pcs Front and rear cyl plugs, regulator/valve body
5 х 2.5 – 1 pc Pressure gauge
5 х 1.5 – 5 pcs Front of the regulator piston x1, regulator adjustment screw x1, .22cal transfer-port, x1, fill probe x2
Matador R3M O rings
2,57 х 1,78 (005) – 2 pcs (front plug filling valve x1, R3M mag indexing cam tensioner x1)
5.1 х 1.6 – 1 pc for .22cal – 6 x 1.6 for .25cal R3M Breech to pellet probe
9 х 1.5 – 1 pc Rear of the regulator piston
19 х 2 – 1 pc Suppressor seal
25 х 3 – 4 pcs Front and rear cyl plugs, regulator/valve body
22 х 1.5 – 2 pcs (per mag) R3M multi-shot mags
5 х 2.5 – 1 pc Pressure gauge
5 х 1.5 – 5 pcs Front of the regulator piston x1, regulator adjustment screw x1, .22cal transfer-port, x1, fill probe x2
Morana O rings
2,57 х 1,78 (005) – 2 pcs (front plug filling valve x1, multishot mag indexing cam tensioner x1)
5.1 х 1.6 – 1 pc for .22cal – 6 x 1.6 for .25cal – multishot breech to pellet probe
2.5 x 1 – 2pcs (.177) 3 x 1 (.22) 4 x 1 (.25) – single shot Pellet probe
9 х 1.5 – 1 pc Rear of the regulator piston
19 х 2 – 1 pc Suppressor seal (non escentric)
25 х 3 – 4 pcs Front and rear cyl plugs, regulator/valve body
22 х 1.5 – 2 pcs (per mag) R3M multi-shot mags
5 х 2.5 – 1 pc Pressure gauge
5 х 1.5 – 4 pcs Front of the regulator piston x1, regulator adjustment screw x1, fill probe x2
.22 probe is 3×1 N70
Ill do a full list up when I get a chance
Yes please!!! Lelya pellet seater/breach for .22 please. Just had to replace both of them and now I’m with ZERO backup left :/
Does anyone know the complete O-ring list for Lelya .177 and other calibers?
or who sells the complete o-ring kits for Matador .25 and lelya .177? And Transfer port brass o-ring?
aaaaaaaaaah what O-ring you talkin about George? And who the heck is Ed? What does Ed know?
It is right… I got the O ring list from Ed. I already blew an O ring and replaced it (my fault).
You can see from this old thread it used to be even smaller…
Keyser,
I started to think about this and it doesn’t seem right. The pellet is 7.62 mm and it has to fit through an oring with a 7mm I.D.?
Clint,
here ya go
http://www.oringsandmore.com/viton-oring-7-x-1-5mm-price-for-25-pcs/
Anyone know the size of the oring that seals the pellet probe on the Gen 2 .30 caliber Matador?
Clint
aw, I see ……….. cool movie, gay yes but cool ?
Well a kidney u can live without one (unless that was the last one u had ? 😆 ) and half a liver will eventually grow back said the wife.
Think on the bright side Oak you survived the organ trade, u just don’t know who will end up with them though ? 
That’s the only O-ring u need to get I have a 22 cal so I didn’t order that one.
The other sizes, I have them all except the largest one that is on back order.
When it comes in soon, if u’d like I’ll send u some pro bono on the organ re-transplanting cost to u.
Just PM me your address Oak.
~ Greg
Thank Greg! As usual you show up BIG TIME! Ratso was given to me by that sick old man in Toad Suck known as the Uncle :hoot: . My last name is close to the character Dustin Hoffman played in Mid Night Cowboy (CIRCA 1969) Ratso Rizzo. Hence the old man has crowned me Ratso. The only reason the crazy old fart speaks with me is that he already conned me out of one of my kidneys and now he wants half my liver.
N1.60X006.1 Buna-N 70 O-ring
http://www.theoringstore.com/index.php?main_page=product_info&cPath=368_12_40&products_id=18377
or
http://www.oringsandmore.com/metric-buna-orings-6-1-x-1-6mm-price-for-25-pcs/
I can’t find the 6.0 in stock ?
You sure seem to have a lot of friends Oakey ? :winkn:
How did you get the nickname Ratso ?
Is it an acronym, meaning ?
~ Greg
You are an opportunistic PIG Soze waiting to pounce on a simple tree rat. Our greatest of uncles made mush from your thought
Ratso
Spoiled Rotten unworthy tree rat.
:rofl: hey old man :hoot: I thought your reading comprehension was better. I said it started with the first mm number found in .25…
besides I’m not going to make it easy on old ratsie. The answer is right under his nose…it’s in this thread :3:
- You must be logged in to reply to this topic.
Rear regulator piston of the Lelya and Veles is 8 x 2.5?