Could it be possible that using a Shroud for a 24" barr
Could it be possible that using a Shroud for a 24″ barrel with an 18″ barrel could be causing accuracy problems? I am just not impressed with the groups I am getting at any psi or PW setting….The POI is all over the place….The fps is consistantly getting lower with each shot by an avg of about 4 fps. There will be a few times that 3 to 4 shots group well but the rest are just don’t live up to the AirForce reputation…..I have checked and double check every screw and everything is tight and staying tight….I have run out of things to test….Need some creative troubleshooting methods…..
All Replies
How are you holding the rifel I have seen on here in the past that if you are clamping it in a vice without shouldering it. you can lose the accuracy you are looking for.
Sure did pablouk, I was hoping that was the problem but …..It was clipping the other day because i didn’t double check the shroud, but I fixed that….everything is line up and clear….
Have you checked for clipping?
- You must be logged in to reply to this topic.
Prone with the bipod….I have a pad under the hand grip for support there too….
I even alternated every 5 shot between JSB and Kodiak…Both shot pretty much the same…..My Talon SS shot tighter groups….