Fuxineering Pcp Degree
You Fuxineers are always fuxing with your Airguns, sooner or later you will fux it up beyond repair. It’s already a great gun from manufacturer….just shoot :4: and enjoy. I really don’t understand so much concern over an ES of 21 or 20 or whatever? When shooting at 900 + fps and trying to get ES to 10…your pulling your gun apart to achieve a little more than a 1% correction…WHY?? These are hunting guns not BR guns (although accurate enough), POI will not change much with a 1% correction to ES. Besides this is a measurement of the difference between the highest fps shot and the lowest fps shot in the string. The standard deviation would be the best indicator regarding shot consistancy of your gun. Mine stays around 2 std out of box. Me Likey!! :8: :8:
All Replies
So I went out for pro-chrony testing today. Targets set at a laser-distance of 75yds. 14 mph wind at 180 degrees, I think YAW effected accuracy. Pictures and stats on targets of all 4 shot strings with JSB Exact King and King Heavy; two 9 shot strings of each. More info written on targets. From Talon Tunes out of box 1,100 shots to date. Reg set at 160 Bar, which I understand is high, but I like the consistancy of my gun. Edit: shooting off patio table on bi-pod with bag under the stock-butt.
Great stuff ! 🙂
Wish we could actually make it. Kind of doubt it would clear image rights, but it would be a fun one to have.
If we did have actual patches, they could be awarded to forum members for their dubious “accomplishments”
Meanwhile, we could always add the patch image to any threads that reach an adequate fuxineering level.
Hey, get that patch made I want one also !
http://www.signaturepatches.com/index.html
~ Greg
Dropping about 100fps is not a much for 10yard 😆 no change in target but at50y… will be noticeable 🙄
I wish mine was only dropping 3 to 8 fps when I got it. It was dropping 100+ fps so yes it needed Fuxing with.
:rofl: :rofl: :rofl: I WANT ONE !! :rofl: :rofl: :rofl:
There is nothing wrong with you being an airgun user.
However the reason this forum is here and somewhat popular, is that a number of us have gone beyond the “hardware user” category. We bring together skills and knowledge from many, more or less related, disciplines.
Among other related skill, in the 70s I was an amateur radio operator that bought some hardware, built some hardware from kits, and modified many things to make them work better. Back then there were “Hardware Users” that also did a lot of emergency public service. But they called on the often self taught HAM Radio engineer types to install tune and fix there store bought hardware.
So, I bought a quality airgun and with the help of others we are improving on a good design and maybe taking it to the next level.
No, you’re not on the wrong forum and with experience you will learn to appreciate what others are attempting to do for you and for the community.
Either Using or Working On a PCP gun can be dangerous so please be careful and seek more qualified help until you become experienced. You too could become a “FUXINEER”
hey lurker…
same old skills in ham radio will do great with pcps just the same
QRU QRX… 73s
Beech-gunner,
There is nothing wrong with you being an airgun user.
However the reason this forum is here and somewhat popular, is that a number of us have gone beyond the “hardware user” category. We bring together skills and knowledge from many, more or less related, disciplines.
Among other related skill, in the 70s I was an amateur radio operator that bought some hardware, built some hardware from kits, and modified many things to make them work better. Back then there were “Hardware Users” that also did a lot of emergency public service. But they called on the often self taught HAM Radio engineer types to install tune and fix there store bought hardware.
So, I bought a quality airgun and with the help of others we are improving on a good design and maybe taking it to the next level.
No, you’re not on the wrong forum and with experience you will learn to appreciate what others are attempting to do for you and for the community.
Either Using or Working On a PCP gun can be dangerous so please be careful and seek more qualified help until you become experienced. You too could become a “FUXINEER”
I like fuxineering pcp guns for one and only one reason.
I NEEED to KNOW and UNDERSTAND how it all works!
I will NEVER send any airgun pcp or springer out for a repair or tune.
I can do that!
If your gun has a SD of 2-3, then its the best I have ever seen…keep it forever
I’ll buy that :thumb:
Well the patch anyway ❗ :rofl:
We need these patches…
- You must be logged in to reply to this topic.
Looks good from here BeachGunner. The last 3 or 4 days here have been 20 to 50 mph winds.