FX Bobcat .30 Performance Numbers?
Can someone that picked up one of the new bullpup .30s publish some numbers for us? Thanks in advance….. 🙂
Shot string
FPS
All Replies
IDK I saw that too… The stock on this has one bolt holding it behind the handgrip… kinda seems like it needs some sort of fastener up front. I noticed on teds indy they put another bolt where the lower rail is. the stock torques realy easy on the bipod. Im gonna have fig something out …. Just a few small things. . But this thing is a beast and i love it Im getting one hole 5 shots at 50 yards… Havent got a chance to stretch it out.
I see AOA advertising that the Bobcat has a power wheel. Is that just the non-regulator models?
Well as it is right now it could use some tinkering, I like to realy feel the second stage, but the first stage is a little bit stiffer than i like so it when i get to second its realy hairy, so im gonna lighten up the first stage and it should be fine.. i like it better than my royal trigger.
LOL Lots of bait takes care of that.
What grain are the JSBs? How is your trigger? Must be pretty good from the groups. It appears it is a performer…
I bought 4 tins from flores after i bought the FX ones with the gun so used the fx ones to sight in and chrony it then switched to the JSB’s
I retook that pic of that 2nd group it got folded when i layed flat
anyhow yeh i used to have a lot of pest and stuff but i got that royale and now nothing seems to come within 150 yards of my house
The groups were with JSB’s
I bought 4 tins from flores after i bought the FX ones with the gun so used the fx ones to sight in and chrony it then switched to the JSB’s
I retook that pic of that 2nd group it got folded when i layed flat
anyhow yeh i used to have a lot of pest and stuff but i got that royale and now nothing seems to come within 150 yards of my house
Wow. You can’t beat that with a stick. :horse: I like it… Those bad pellets shoot ok.
Are you a pest/vermin shooter? If so I’d like to see what it does to a sparrow. 😈
50 yards
here is my first
and another got a little more comfy and
50 yards JSB’s 46.3’s 5 shots each
I just took a breather … gonna go out and shoot a few 50 yard groups
I don’t mind the recessed gauge and really like that you are getting about 27 – 80 FPE shots. Fred needs to fix the bottom rail though – they messed up a bit there. I would imagine the 30 cal is a bit loud but that is to be expected at 80 FPE. Your at the energy of a 22 short but with the bullet already expanded to .30. It should knock vermin silly. I hope they release some .30 cal Predators soon.
Any idea on groups with those FX pellets?
How is the magazine/cycling? Smooth?
Trigger?
well it finnally arrived
Right away i started checking it out and noticed 2 things(well 2 that stuck out)
no power wheel
another is the way the gauge is in the stock almost as if the stock need to seat down another 1/4 inch or so between these 2 photos you can kinda see what im talkin bout
its got builtin picatinny/weaver railer on the stock it is part of the stock not removable… ( im gonna have to have it milled off maybe) my bipod adapter fits like crap on it.
so i scoped it out with my setup from my 500 while i wait on my new scope got it dialed in at 50 yards
I gotta say its a little louder than i was expecting but its not terrible. kinda sounds like im over here shooting my framing nailer. Only pcp i ever heard was my royale 500 so. maybe ill shoot a video so you all can hear it
filled it back to 250 bar OH and One of the biggest thing i found was the recess around the fill port(lack there of) it is a major pain in the ass to take my fitting off after topping off
I cant do it with my fingers i had to use some ovary snatchers
886.9
877.9
882.6
881.1
883.1
884.8
881.4
879.7
880.9 end of first clip 2975psi remains
875.1
877.0
875.9
875.0
874.2
877.6
873.6
873.7
880.1 end of 2nd clip 2475 psi remains
876.4
879.5
884.6
875.1
873.3
870.6 last shot on reg
865.1 look at gauge =2100psi
863.5
853.7
shot 3 clips of FX Pellets 46.3 gr I have to say these pellets look like crap
the trigger feels realy good its just a little stiff on first stage well for my liking but i took the stalk off and not quite sure how to get at the adjustments cause the guage is right under there..
so there it is any ??? just ask
My issue is Fed Ex Home Delivery. I beg the vendors to send stuff some other way if possible. I honestly believe the route owner has dementia. His delivery accuracy rate is 50% at best and it has been like this for several years. Sometimes he cant find the address at all and it ends up sitting at the Fed Ex distribution center for a few days. I have a ten foot tall cedar mailbox post with 6″ numbers on it (you can barely see them in this photo but they are very easy to read) of my address. He seems like a nice quiet guy that is maybe upper 60s.
Here i sit and wait… the ups driver is a dick… for some stupid reason my house is like one of his last stops and he always gets here like 6 or 7 at night (pisses me off) so i found him this morning… looks at his list tells me hes got it and starts complaining about how how many packages hes got to deliver and that it would take him too long to find mine… knowing its on his truck man i just wanted to slap him, such a dick, cant take 2 mins to give me my package. If AOA could use other means i would of had it by now. probably last week.. when ever i order anything if i have the option ups doesnt get my business, next time i make a 2k$ purchase it wont be ups delivering!! 😡
I did compare them at the same mag. Still better 🙂
Agree. Scb or amd är much better!
Less mag always looks clearer but compare them at the same mag level. Also – the MTC reticle beats the living hell out of the Vortex´s. Vortex have unbeatable warranty though.
- You must be logged in to reply to this topic.
Well I have 8 tins of JSB 44s on order. I guess I am committed to something. 😀