Get rid of hammer slap???
Ok so I hear this brass piece here is what makes the slap, when you fire your Vulcan.
So what if we were to use a piece of felt, that you put on the bottom of a chair leg.
That has a peel and stick on the felt bottom.
Just peel and stick, the felt on the brass piece, cut it to fit, and get rid of the hammer slap?? 🙄
What do you guys think? Lets brain storm. 
All Replies
That sounds sooooo kinky
Best thing is mount scope low enough so you can use provided cover that’s on the gun. Skin on skin man!
Sent from my Z30 using Tapatalk
GKU u r killing me lol :rofl:
i use this as a cheek rest
hey, wasn’t some one using some type of tubing over barrel where you’re cheek rests?
They are sluts
is tony making some thing, to fix the hammer slap? 🙄
No sorry Fox but GKU is a Vulcanless man.
Yes I am.
I prefer Klingon women they like it rougher !
Beside which they can slap that hammer and fix any problem I’m having right away ! :rofl:
~ GKU
is tony making some thing, to fix the hammer slap? 🙄
No sorry Fox but GKU is a Vulcanless man.
order one???? 🙄
is tony making some thing, to fix the hammer slap? 🙄
I guess it would depend on the HST adjustment if it’s all the way in or not so you can install an O-ring inside to stop the spring from vibrating/twang once fired.
You need to experiment with different sizes depending on what room you have left in there, the more the better !!
You don’t want this O-ring to fully compress/smash in there, it may affect the consistency of the springs strength.
http://talonairgun.com/forum/viewtopic.php?f=33&t=32245#p326682
~ ATB ~ GKU
You should contact Mr Tony about this problem and order one today!
it will hold up better too.
yes the leather may work also, as well thx.
i like having other ideas, too pick from, by using things u may have on hand.
Please don’t leave a finger in there. By the way eelect has been taking out your People with his Vulcan…… :suprisedn:
oh good 1 GKU like the idea of using the o-ring.
it will hold up better too.
yes the leather may work also, as well thx.
i like having other ideas, too pick from, by using things u may have on hand.
How about a thin piece of leather glued to it? leather is tough and nothing to come off like felt would.
I don’t own a Vulcan and don’t know when it is cocked how much room there is left on the inside of the Hammer spring/spring guide if any.
I guess it would depend on the HST adjustment if it’s all the way in or not so you can install an O-ring inside to stop the spring from vibrating/twang once fired.
You need to experiment with different sizes depending on what room you have left in there, the more the better !!
You don’t want this O-ring to fully compress/smash in there, it may affect the consistency of the springs strength.
http://talonairgun.com/forum/viewtopic.php?f=33&t=32245#p326682
~ ATB ~ GKU
Oak your right it was Greg. have you tried it?
- You must be logged in to reply to this topic.
YES indeed they are, BUT it’s an honest trade. 😆
~ GKU