Q:

Lelya #090 test results….

Ok fellas. The Lelya is finally here…. I pulled it out of the box, slapped a
Leapers 4X32 scope on it with low profile Weaver rings (Needs Medium for
proper eye alignment), filled it to 3,200psi and sighted it in at 13yds. I
checked it at 20, then 40, then 65yds to see how it would group… The
wind was blowing mostly right to left but, it has a tendency to swirl really
bad here at times so, don’t fault the gun for the longer groups….I refilled
to 3,200psi, hooked up the Combro and let her rip….. It really looks like
this is going to be another boring, hit everything you aim at EDgun….lol

Here are the Chrony results….

JSB 10.4gr 3,200psi fill
35 Shots
High 797.00
Low 783.00
Extreme Spread 14.00

Average FPS 790.20
Average FPE 14.42
Std. Deviation 3.06







5 shots @ 20yds.. I had not yet adjusted the trigger and I pushed that one
shot right. Out of the box the trigger was pretty stiff… It is now nice and
light just like the Matador..

6 shots @ 40yds

5 shots @ 65yds. The elevation deviation looks great.. Can’t wait to see
what it will do in calm wind.

This is a Crosman CHP / JSB comparison 5 shots @ 20yds with the
same wind…

This is CHP / JSB 5 shots @ 40yds… Looks like the CHP’s really start to
open up.. One missed the target completely left.. Never was a big fan of
CHP’s anyways. No offense Steve…lol
CHP 5 shots @ 40yds

JSB 5 shots @ 40yds

EdGun

All Replies

Viewing 15 replies - 46 through 60 (of 66 total)

1 2 3 4 5
quote daddy 0:

were can i find that air riflle at i havent seen it on edgun web site

He is some info on the gun…
http://talonairgun.com/forum/viewtopic.php?t=11937&highlight=edgun+specs

This is the guy to order from in the US…
Tony Rudenko
trudenko@yahoo.com

Wow, what a difference!

I would think it would have been easier and cheaper for them to do that from the start.

I remember years ago I discovered crinkle paint, put it on all my guns, put it on everything.

My crazy exwife used to complain that it made her tits sweat tho.

Roachcreek

were can i find that air riflle at i havent seen it on edgun web site

That looks great BLACK.

I like that 😎

Well it is done…. I sanded down all of the sharp edged lines and smoothed
things out… I didn’t bother too much with the inside of the finger holes
because I figured the Bedliner would cover most of the imperfections….

Here it is….


BEFORE

AFTER


quote GT500:

How loud is it? How about a video 🙂

It is so hard to explain how quiet any of the rifles are but it is quieter than the
Matador and the Matador is quiet.I think that is due to less power and a
smaller hole in the barrel…lol I will try to do a video… Never comes out
very good as far as sound comparisons…. It seems everything sounds the
same….lol

How loud is it? How about a video 🙂

quote Bean:

sooooooo tempting.

Is that the only stock the imports come with?? I think I remember some really sexy laminates on the website.

The stocks are being made in the US right now… Tony only gets the
metal…… I think they will all be Walnut from now on….

quote foxback:

Nice, very nice! 😯

Thanks foxback

quote WalkonKing:

Time for some black bedliner for that stock. 😀

YEP!!!!!!!!!!I just finished sanding out the sharp edges and took off as much
finish as I could… Bedliner coating tomorrow…..

quote tonka485:

I like that gun…this is my 3rd time back here to look at it….I could be wrong but I think there is a thing called excessive compulsive….and I think it might apply to me…..damn guns…..I want em all

I understand the addiction tonka…. There are still some that I would like
to have…

quote=”SteveinLA”]That’s sexy! :D[/quote]

Thanks Steve… Should look better black… We will see tomorrow……

That’s sexy! 😀

I like that gun…this is my 3rd time back here to look at it….I could be wrong but I think there is a thing called excessive compulsive….and I think it might apply to me…..damn guns…..I want em all

Time for some black bedliner for that stock. 😀

Nice, very nice! 😯

sooooooo tempting.

Is that the only stock the imports come with?? I think I remember some really sexy laminates on the website.

quote Jeff:

I don’t even have an Edgun Matador yet so quit torturing me with info like this. 😆

Shot string looks great! What was the ending fill pressure?

I want to say 1,800psi but, like a dumbazz I didn’t check….

Viewing 15 replies - 46 through 60 (of 66 total)

1 2 3 4 5
  • You must be logged in to reply to this topic.