Most Silent Air Pistol ???
Hi Folks could someone shed some light on the finest Airpistol Spring/PCP
that could be in the range of 650fps to 800fps. (.177 Cal)
But it has to be quite as a mouse fart like when you have one of the Tony Shrouds on the Talon/Condors.
Budget around 200$$$ to 400$$$
All Replies
Varminter : After the new look you gave the Edgun….with the truck bed liner. Why would you bother about the color 😉
That was a cool set up buddy….. :8
Jeff : Some more write up about the shroud baffel for the Veles / Matador
Pros / Cons 🙄
Did you open it cauz it was not performing ?
Or was it out of curiosity?
The main reason why I wanted the Veles after reading all good things were, quietness / shot to shot consistency…looks which came with the sound and accuracy.
Now am really worried as Tony has said that they no more come with the shroud. 😳
This is the shroud baffel that were fitted to my gun… It makes it impossible
to add a screw on mod without drilling and tapping the end cap..
I was referring to the old Matador, not sure if the new Matador will come with new shroud or not, there was some issue with new shroud design, it should be fixed by now then, we haven’t seen the new shroud yet.
Even with the newer Matador shroud design? Tony told me there was no add on available for my shroud.
The external moderator is an optional piece that you can get when order the Veles, by the way, the Veles showed above is a long version, EDGun stop selling it, they only offer standard version now.
You can use that moderator on any of the EDGun, included the Matador.
I think that guy made that extension himself…. I don’t think it is an option…
I like the butt extension too! Very cool! I would hope they would have the option of getting one that is black or a color that goes well with the pistol.
Is the butt extension extra ? I like that setup.
later
“Cygnus X : the gun in the pictures seems longer than the one on the “site ?”
That because there’s a additional compensator on the pic I have uploaded.
The original kit comes without that.
If it still looks longer, God Damn it …these new gen cameras … 😉
dvu0704: I sold it to fun other gun, but will buy it again later. 😉 🙂 😀
I was getting 25 full shots by using the “JSB Diabolo Exact Heavy .177 Cal, 10.2 Grains, Domed” @ everage 700 fps.
I sold it to fun other gun, but will buy it again later. I was hoping to hold the gun a little longer to try a new “H&N Baracuda Match .177 Cal, 10.65 Grains, Round Nose”, I am sure this pellets will work well with the Veles.
Ahh man that gun is awesome. Cant wait to see the velocity and usable shot count.
the gun in the pictures seems longer than the one on the site ?
Thanks for the Link Jeff ……and some cool pics…. 😯
One think in the video ..I.. liked…he kept saying ****niaaa…and would unmount the butt……He did that like 10 or more times……
😛
Here a close up for the loading port 🙂
- You must be logged in to reply to this topic.
Pros / Cons 🙄
Did you open it cauz it was not performing ?
Or was it out of curiosity?
The main reason why I wanted the Veles after reading all good things were, quietness / shot to shot consistency…looks which came with the sound and accuracy.
Now am really worried as Tony has said that they no more come with the shroud. 😳
I just pulled the shroud because of curiosity… I was trying to figure out
how to add a moderator to the end…..
I think Tony is saying that the Veles does not come with an additional
moderator to fit on the end of the intergrated shroud but you might want
to ask specifically about that….
Standard Pistol “Veles”
Caliber 4.5 mm
Length 330 mm
Width 30 mm
Height 160 mm
Bulk 1.04 kg
Barrel length 195 mm
Barrel Lothar Walther
Reservoir volume 60 cm3
Operating pressure 240-100 atm
Number of shots with one filling, not less 40
Fixing under Optical Collimator sight “Dove tail” 11 mm
Open sights rear sight and front sight
Moderator integrated into the casing, the possibility of additional moderator
The truncated gun “Veles”
For those who need small size pistol.
Caliber 4.5 mm
Length 270 mm
Width 30 mm
Height 160 mm
Bulk 0,9 kg
Barrel length 195 mm
Barrel Lothar Walther
Reservoir volume 40 cm3
Operating pressure 240-100 atm
Number of shots with one filling, not less 30
Fixing under Optical Collimator sight “Dove tail” 11 mm
Open sights rear sight and front sight
Moderator absent. Ability to use additional moderator