MRod Air P12 Update thread
MODERATOR EDIT…This dealer is not allowed to be promoted on this forum
Sorry…
This dealer is not allowed to be advertised here on the forum.
He is the same person who ripped off my WokGard 15 designs.
I am not going to let him profit from this forum since he stole my design
All posts mentioning his forum will be deleted
All Replies
Yes it does…that’s a different your playing, yes it is! :2cents:
That sounds like a option :2cents:
Rapid Magazines although more expensive than a MROD mag… They insert from left instead of hanging off the Right.
That sounds like a option :2cents:
Yes so…it’s not the bolt handle that’s the issue; it’s the mag in your face that is!
Not so,
The retrofit multi shot still has the rear bolt handle.
This is offered in left hand.
No problem
It Looks as if us lefties are going to be left out in the cold again… :butkick:
Brgds
Jack
Reaper
Talk about hittin the nail on the head.
You are correct, on all counts.
Not that we are just sitting around.
Been doing some consulting with our brothers from across the pond, and working out the multishot breech.
Thanks to Jan Willem from the Netherlands.
Good news, two types are in the mix.
We have been reviewing his designs, and come up with a retrofit for our P-12 multishot breech system.
Its going to take some new tooling, and we will have that late Monday, so we can start playing with the prototype.
Ill keep you posted on the progress, just been kinda preoccupied with getting this all worked out.
We were able to render a solid model, and it looks very promising.
The retrofit, will be first, and good for the 22 and maybe 25 cal which will retain the rear mounted bolt handle.
Its going to take a little machining, and some custom tooling for some creative spot facing, then we can pin the new bushing into the
factory breech.
After that, we can do more testing on the larger bores.
They will require a larger breech for sure.
Once the first retro fit is tested, it will be available very soon.
The shroud design is just starting production. (We just didn’t have enough room to work with inside the factory shroud between the muzzle and the end cap).
Both single tube, and extended two piece tube types are being produced.
Looks like they will be ready by the time our order gets here.
Meanwhile, I have our shop slave testing and recording the M-10 performance.
I can tell you this much, they were under estimated (big time)
Havent had a lot of time to update the website, so I thought I would post it here.
After all, you guys rock.
Now if you will excuse me, I need to get back to making chips.
Later guys
new shipment has been delayed 10-15 days as posted on the new link on mrodairs website.
the transfer port is getting a fine tune to be able to bump the fps with the stock spring up to be able to be tuned to 910fps as mike under estimated the port size and thanks to the first 20 buyers of the p12 have diagnosed the issue and are making changes from the factory to keep the price the same for us.
new baffles are coming soon, as well as a new end cap for the shroud with the baffle kit soon as well.
its all listed on mrodairs website under the updated posted as of today on the 14th, clearly says the 15th shipping date will be delayed 10-15 days to do a few last minute changes from the factory to keep the price low for us.
this should be the LAST change that delays the rifles from the factory from being shipped. we shouldnt have any more issues after this point or delays except for the initial inspections of the rifles when they are received by mike to make sure the changes are to spec.
:2:
Any Updates on the May 15 shipment from SPA? :whistle:
is there any new news on baffles?or longer tube and 4 or 5 baffles to really quite it down.just a question.the noise on my 22 is a little louder than I like.just needs a little help. 😉
I believe so too. Its too short too
Sent from my Z10 using Tapatalk 2
Besides the shroud, it’s the bullpup stock that’s prohibited.
Sent from my SGH-I747M using Tapatalk
Anything with a shroud or device that surpasses sound down to almost nothing is prohibited or restricted in Canada. Benjamin Marauder is restricted too. I once saw a Canadian version of a Rainstorm with no shroud. May as well buy a 22 powder burner then
Sent from my Z10 using Tapatalk 2
I’ve tried 2 dealers here in Canada to get the P12 imported and contacted the RCMP to see if that particular rifle is prohibited and they said it is. So, no dice for us, which is too bad, i really like that rifle. Maybe, i should become a U.S. citizen just so i could own one. Lol
Sent from my SGH-I747M using Tapatalk
We are working with our broker, to export however this will only be available after we receive our first large order and ship our current pending Us orders.
This will of course be in strict compliance to all export licensing requirements, and they vary greatly depending on the country.
Once we receive our large order, we can discuss this service further.
Inquiry can be sent via our website contact page.
Thanks
- You must be logged in to reply to this topic.
I guess thats what i get for due dilligence and us keeping eachother updated via email then eh mike? lol
its good to hear a solution for leftys can be had with a rapid mag. still waiting on the mass order to get my hands on the p12 :whistle:
patience is a virtue and im antsy as a kid on christmas eve to give this rifle a true consumer review to get the nay sayers silenced about the “cheap chinese rifles suck” attitudes. :angrymob: