**NEW ORDER ***any interest in 4500 psi condor tank
Im working on getting some carbon Fiber tanks, The manufacture will be sending me some for testing. i will send them to get tested and if all goes well i will get more.
Im just looking to see if there is any interest? These are aluminum core carbon fiber wrapped.
Water capacity: 0.5L
Diameter: 60mm
Working pressure: 30Mpa
Length: 310mm
Weight: 0.6kg
Thread: M18*1.5
Not sure on a price yet.
All Replies
😀 😉
Ok. At this time they are all spoken for. If there is someone who still wants one let me know and ill put u on a list as a backup incase somebody backs out. Cant promise yah one but we will see. So just let me know. Thanks.
Can’t wait to get them… Money has been recieved by the company. Just gotta wait on them they have to be made cause I wanted them to be black. She had said that it should take about 3 -4 weeks to ship.
Looks like all but one have been spoken for. So if someone wants one just pm me. When I get these in I will post pics and try to put one on my condor right away and take some pics.
Taking alittle chunk from frame, looks doable Dman.
That sounds safe
Doug i was thinking my Frame. I edited my post i didn’t really think when i was typing that.. I don’t want anyone shaving the bottle neck down
I don’t know if it’s a good idea to shave off a .250″ There is a reason it is made that thick around the neck. The neck is a lot longer on this bottle then your normal paint ball tank.
Ok so i emailed to find out the neck size and its … 38 mm 1.49 inches. not sure the stock condor neck but i haven’t taken mine out to measure. but just running a tape across its like 1.25 somewhere close. So the Frame should only need a little bit shave above and below the bottle neck. nothing crazy
I don’t think it will be a show stopper. I agree you bigger neck to support the pressure. Looks like you would be able to clearance the frame and go that route. Im going to put one on my condor and one on my RAW hm1000x and i don’t think ill have an issue on that.
That picture was just a pic i found that looked really similar, but I’m sure they are probably the same size. When i get them in hand ill fig it out and go from there
i think making the bottle neck smaller will compromise it’s strength.it’s dangerous especially if you want to use it at 4500psi
it is wiser to rebuild your condor valve housing to fit this bottle or use Tony “Talontunes” Adapter or Marmot Militia Adapter.
in indonesia we modified the condor valve housing to fit this bottle and also managed to fly 43grains Eunjin .25 at 1175fps (3400psi), or 940fps (3400psi) with black mamba 60grains ?
anyway
good luck guys.
Regards
Janssen
Guys, that picture is from my shooting buddy Janssen, we are in Indonesia.
Please note the neck of the bottle is larger, and will get in the way of the frame if fitted directly to stock valve, it wont work without some modification!
We have to make a longer valve housing.. or use the marmot militia regulator.
Probably you can ask the factory to make the neck smaller?
Hope this helps…
8 are spoken for. 2 left
They are gonna be SWEET!!!
Yee-Haw, this is fun!
- You must be logged in to reply to this topic.
i just got an email back from the manufacture…. Here is what they say
I have checked the 0.5L carbon fiber cylinder for you, and maybe we could deliver it to you next week, if it’s possible, I will try my best to send you this week, before we send it, I will take some photos for you.
So looks like we’re gettin close. :8: Will keep u all updated