Stock Talon SS velocities with 13 ci regulated tank
Hello all,
Just wanted to post some velocities using a regulated 13 cubic inch tank from Expert HPA. The gun is a stock Talon SS with a 12″ .177 barrel. The top hat on the Co2 adapter is set at .045. The PW is at 4. The regulated tank is set at about 1500 psi. Starting pressure was 3100 psi down to 1600 psi. I got 65 shots from a 13ci tank 😀 . I am amazed with these rifles. Here are the numbers using 10.5 grain cp heavies. The pellets were not sorted and my alignment with the chrony was not very consistant but the numbers look good. The energy is about like an R9 but this gun is much more compact and lighter. The regulated tank with Co2 adapter is about 7 ounces lighter than a standard talon tank. I am going to switch to my 12″ .22 barrel and try a string with it. I will post the results as time permits.
740
741
742
748
745
751
753
745
746
749
749
743
752
747
752
751
747
746
743
750
749
748
752
752
751
753
753
757
754
750
747
753
742
744
754
752
748
749
751
752
752
749
755
752
750
747
752
748
747
753
752
750
749
750
750
746
747
745
750
747
754
744
749
744
743
[/img][/list][/b][/quote][/code][/list]
All Replies
Thanks for the help mamcrackin!
Here is a picture of my setup. I was looking for something light for starling sniping and I think this fits the bill! The scope is a 4x leapers with illuminated recticle and mil-dots.
The regulator on the tank screws into the Co2 adapter which adds enough length to get the right pull with my butt plate. Just had to play with the top hat and PW to get the most efficient combination. I would be happy to post a picture, but I am a little stupid on how to do it. Any help with how to post pictures would be appreciated. 😳
Just go to photobucket and open an account and transfer your pictures there then follow the directions below.
This explains it and is easy to do….
Mamcrackin,
The regulator on the tank screws into the Co2 adapter which adds enough length to get the right pull with my butt plate. Just had to play with the top hat and PW to get the most efficient combination. I would be happy to post a picture, but I am a little stupid on how to do it. Any help with how to post pictures would be appreciated. 😳
Talon4me. How did you adapt the AirForce air valve to the HPA regulator?
Thanks
Here you go
Thanks get the blue jay. I have been searching for something like what he is talking about…..
Thanks
Here you go
Talon4me where did you get that regulated HPA tank? I couldn’t find a web site for Expert HPA….
Thanks
I like your string its more consistant than mine which has a downward curve, cant wait to see your .22 barrel string .
BTW my gauge is crap, I wouldnt be able to tell if it was 1600 or 1500 on mine. I am looking for a gauge which has better spaced readings.
Cheers
Faisal
Very nice string Talon4me……
Do you have a 24″ .177 barrel??
I’d realy like to see those numbers….
Agin very good …..Shelby
- You must be logged in to reply to this topic.
Oh man that’s great….I will start working on getting the regulated tank….Thanks a ton for the info….I have been wanting to do this for a long time……