Veles, Lelya, Morana, Matador .30.
Dear friends,
We started production of the following guns:
1. EDun Veles, short, caliber .177, walnut or soft-touch grip, right handed, moderator.
2. EDun Veles, standard, caliber .20, walnut or soft-touch grip, weaver base, right handed, moderator.
3. EDun Veles, standard, caliber .22, walnut or soft-touch grip, weaver base, right handed, moderator.
4. EDgun Lelya, walnut stock, caliber .177.
5. EDgun Lelya, walnut stock, caliber .20.
6. EDgun Lelya, walnut stock, caliber .22.
7. EDgun Lelya, walnut stock, caliber .25.
All Veles and Lelya are single shot guns.
1. EDgun Morana, long, cailber .25, walnut stock, multi shot.
2. EDgun Matador, standard, caliber .30, walnut stock, single shot.
3. EDgun Matador, long, caliber .30, walnut stock, single shot.
Expect them to be ready to be delivered in Janury/February (if will be possible make it earlier, we will do it). I will deliver dealers in US only based on their order. So if you ever planned to get some of those guns, contact US dealers and reserve the guns.
Ed
All Replies
For those ones on the list for a Veles or Lelya I would just like to provide some information that could be useful…..
Veles:
The Veles is a pistol with open sights but the sights are pretty much useless IMHO because of being too bulky and not adjustable.
If you like open sights shooting then stick to the OEM moderator because the tube diameter is smaller than usual and a custom thicker diameter tube would not clear the sights.
Lelya:
Apart the wellknown pros and cons please consider that the overall length of the rifle is less than 60cm and in some countries this makes it a “short weapon” with power level restrictions.
As far as I know, the trigger mechanism/design on the Matador/Lelya/Veles is pretty much the same.
ATB
12″ barrel…..makes a big difference compared to a pcp with a standard length Edgun barrel. Figure about 50fps per inch difference.
Hoot:
PS: No Edgun in forum members hands has gone unmodified. While 30 fpe may be the announced power, trust that that limit will be tested to the max. I’d be very surprised if we can’t get 35+ fpe from it. With a tweak or two, 40 fpe might be possible. A lot depends on what Ed has done to the valve/reg setup.
I’m still taking pre orders.
is the Lelya 25 cal a little low at 30fpe when the 22 cal is 25fpe???
Thanks. I have been following the thermal systems for a while and I am sure the price will drop as they become mainstream.
The latest Pulsar N770 works very well IMO = even at the 7x. I tried one at about 250 yards and easily saw coyote sized targets. He says he shot a fox at 250 yards and rabbits maybe 150 yards. They upgraded the IR significantly on the N770 from the N750 and prior which were pretty worthless (most common complaint) – otherwise they are nearly the same. With the distances it works at well with the new IR, it can double for coyotes.
SeCoda,
I have been pig and coyote hunting with it for the past 3 years. What I like the most about it is the ability to “clip” it on any of my day scopes. Most of my rifles use acog’s and if they co-witness at the same height then there is very little degradation of accuracy. I just attach it on the picatinny rail in front of my scopes. Mine is a gen 2+ cgt. So almost gen3. It does need a good IR illuminator to be used in very low light conditions. Luna makes the best illuminator (LN-ELIR-3).
http://www.lunaoptics.com/elir12.html
Work best with scopes under 5x. It is a different system. The unit you are looking at is based off of a video chip. I don’t quite know how to compare the two. I can see these video systems getting better and better. They also are moving to Thermal type systems that have many benefits over those that amplify light.
AKay
Elmer,
Rumor is that it should’ve already been made available. Think they might have 86ed some features to keep cost down. I’m still getting one.
only a nice stock is not all he has!!?? he has more and more unique rifles and other stuffs,,, check with him,, :biggrinn: :biggrinn:
Wow, such a unique and nice looking stock. .
I am but a simple man who collects nice rifles but this one is not mine.. it is Eds .30cal.
http://www.bhphotovideo.com/c/product/1030880-REG/atn_dgwsxs312a_x_sight_smart_technology_hd.html
This alone makes very interesting.
– Records Stills or Video in 1080p
Given it’s going to be released in less than 2 months, I’m surprise there’s no reviews. You’d think they sent out samples to vendors.
Ride,
It looks like it will depend on how high my scope mount is. I tried to upload a pic of it on my 22 cal R3 but the site said I have reached my posting limit for attachment.
AKay
Here’s another option for day/night scopes. It should be available soon.
http://www.bhphotovideo.com/c/product/1030880-REG/atn_dgwsxs312a_x_sight_smart_technology_hd.html
I don’t think it will fit either and those are not cheap. Its easy to remove the muffler if noise isn’t an issue.
How well does the PS-22 work? I have been looking at a N770 Pulsar for my 30 cal since most raccoon shots are at night. The limitation is they are only 7x.
Jim carries them at PAG
http://www.precisionairgunsandsupplies.com/ProductDetails.asp?ProductCode=PulsarN770
I don’t think it is gonna fit after googling and finding one installed.
……….
Thanks for the replies,
I do not want to lower my scope. Currently my scope sits 2.4″ above the barrel axis. About 40mm above the rail. This does allow a comfortable cheek weld. My concern is with my ps-22 night vision clip on. This adapts to my scope and has a diameter of 78mm. It would clear the top of the rail and is about 6″ long. I am worried about the lack a clearance about 6″ past the rail. If I need more clearance I would just buy a higher scope mount. I am just doing some preliminary planning before I buy.
AKay
- You must be logged in to reply to this topic.
Are all Matador,Lelya and Veles have the same OD of air tube? same size of regulator?