Most Silent Air Pistol ???
Hi Folks could someone shed some light on the finest Airpistol Spring/PCP
that could be in the range of 650fps to 800fps. (.177 Cal)
But it has to be quite as a mouse fart like when you have one of the Tony Shrouds on the Talon/Condors.
Budget around 200$$$ to 400$$$
All Replies
I’ll have that confirmed with PA Team, when I place orders with them.
Thanks Again 🙂
That looks right to me. The only thing I’m not 100% sure of is that it should be BSPP threads, not NPT threads, and the Pyramid description doesn’t specify. But I think that is the standard for high pressure air fittings, so I’m pretty sure it’s the right one.
Hey Toshik,
I want that one, at least send me the Additional compensator.
Just PM me the price man…….
You can always get one…. 😥 spare this one for me………………
crowpopper : I wouldn’t be surprised if you throw a review before me.. 😉
acourvil: Did exactly the way you suggested…..for my Talon/Condor
The complete setup is plug and play…….Love it this way….
Something I should have done long Back……. 🙂
One more question now that the pump has the female quick disconnect.
For the veles I think, I just need this “Quick-Disconnect Male Adapter”
since the Veles would come with the 1\8″ male adapter.
Correct me if I got it wrong.
http://www.pyramydair.com/s/a/Quick_Disconnect_Male_Adapter/596
I wanna be dead sure that I have all accessories for a full on review the day I get my baby…….
Looks nice.
This early version of the thing in front was the quetest!
theres an edgun veles for sale on theyellow now 😯
wich i had 1300
damn thig is just wanting me to buy it lol
🙂
acourvil is owned a standard Veles with external moderator, ask him if he can sell his to you, LOL.
I would suggest that you get a short hose with a female quick disconnect like this http://www.pyramydair.com/s/a/Air_Venturi_Thread_Converter_Hose/2778, put that where your talon bottle fitting currently is, and add male quick disconnect fitting to both your Talon adapter and Matador fill probe; then you can use either with a minimum of hassle.
Al you Veles owners : Could you put some light about the fill adapter as I await my Edgun.
Now below is the setup I have, and I just don’t want to change anything there :
> 
> 
Just need the perfect male adapter that could be fit to the female adapter in the pic and the other end to the Veles.
The adapter in the picture is the female adapter to an FX pump.
I unscrew my Talon/Condor bottle and it fit the adapter in the pic.
That’s a sigh of relief 😀
Now I can relax and wait for my stuff to come in.
moderator to fit on the end of the intergrated shroud but you might want
to ask specifically about that….
And I did ask him…about the additional moderator to fit on the end of the intergrated shroud.
Reply was “Its NLA which meant, its No Longer Available”…… 😳 😥
How would rate your Edgun setup compared to a well shrouded Condor/Talon ?
Just with the integrated shroud ?
Additional moderator to fit on the end of the integrated shroud ?
Sorry if I have asked that the second time, but am a little worried about the quietness for the kind of $$$ am paying.
It is hard to compare the 2 guns but I can say that if I had my choice to
buy either again, I would buy Matador even though it is more expensive
than Condor… I much prefer regulated guns….The EDgun can not
produce as much regulated power as the Condor so the shot is quieter…
The Matador has really no need for additional moderators… I have not
tried the EDgun addon moderator so I don’t know how much more quiet it
makes the gun…. I think the integrated moderator is enough…
I have a custom made addon moderator for my Matador but the extra
length it adds is not worth the small amount of quiet it provides…
moderator to fit on the end of the intergrated shroud but you might want
to ask specifically about that….
And I did ask him…about the additional moderator to fit on the end of the intergrated shroud.
Reply was “Its NLA which meant, its No Longer Available”…… 😳 😥
How would rate your Edgun setup compared to a well shrouded Condor/Talon ?
Just with the integrated shroud ?
Additional moderator to fit on the end of the integrated shroud ?
Sorry if I have asked that the second time, but am a little worried about the quietness for the kind of $$$ am paying.
- You must be logged in to reply to this topic.
It is definitely a Canine testicular treat…..lol
if anyone knows about dogsballs its you!!! 😆