Q:

50 metes target. CONDOR BIG PROBLEM

I really didn’t like these groups, i was shooting and i had around 4 TO 5 inches of distance between the rolls (10 shots only per fill), the Condor was setup at power level: 12 then 10 then 8 and the tank was filled at 2.500 psi at every power setting, i was using Beeman Kodiak 21.14 gr. also was no wind at roll was just a perfect day for target shooting. The problem its not really me because i have done much better groups then this one in different air rifles at 50 meters, Can anyone help me with this problem? Why is this gun giving very bad groups at this 50 metes distance? Wrong pellets? Wrong setup? Does the rifle has any internal problem? Do i have to change my pellets for Eujin 28 or 32 gr? Tell me a good setup for this gun using this pellet (beeman kod. 21.14gr…………….
Thanks in advance for all answers and i hope it can be fixed! Thanks again to all! AIRFORCE CONDOR .22 CAL

http://s985.photobucket.com/albums/ae337/DuduCondor/?action=view&current=P4130714.jpg

😳 [/img]

Airforce Rifles/Pistols

All Replies

Viewing 12 replies - 76 through 87 (of 87 total)

1 2 3 4 5 6

I shoot mine at 6, but I have my tp hat set at 70/thousanths, and hitting 900+ 24in. barrel, condor.

Best to get your self a crono or some times ranges and or gun shops have ones they will let you use at a small cost. You want to keep your rounds well under the speed of sound. Your options are keep turning the power down until you get there or you will have to use a heaver pellet if you want to keep the power.

quote maw:

try 4,and 6.

How many fps you think i can get with the tank at 2500 psi?

try 4,and 6.

So ill start trying lower the power level before i unmount the gun.
On this case which power setting you guys suggest and how much air on the thanks?
I use beeman kod. 21.14gr
cal. .22
Leapers 8-32×56
Brand New Gun

quote pablouk:

no pic to see?

Too fast or pellet clipping shroud/silencer?

i was shooting with out shroud.

Take a look on this link……..

http://s985.photobucket.com/albums/ae337/DuduCondor/?action=view&current=P4130714.jpg

no pic to see?

Too fast or pellet clipping shroud/silencer?

quote synopsys:

Too much velocity… turn it down and give it a try. 😉

Welcome.

Did you see the picture?

But how much down?
i did tried (power level 8, 2500 psi)
What do you suggest me? thanks

Too much velocity… turn it down and give it a try. 😉

Welcome.

Viewing 12 replies - 76 through 87 (of 87 total)

1 2 3 4 5 6
  • You must be logged in to reply to this topic.