blodnob valve intructions
i got the blodnob valve on my tank but the guy forgot to send the instructions with it…i cant wait forever for it…
do any of guys know how to put some air in the tank?
i tried but the air just leaks out…
any help will be appreciated.
thanks.
All Replies
Only if it were a Lucas… 😆
Is that a bad thing?
Jesus, the way some of you lot go on you’d think these valves were a fucking carburetor. 😆
Actually my life long friend showed up from the get go
I told him to come back later for the heavy stuff
Well he stayed the whole time busted ass
all the other so called friends were no where to be found
your right Stower the true friends stick with the good and bad
and the others disappear til the moving truck goes away
Saw
Yep your friends always disappear till the boxes are gone, but the wife knows where that box should be moved to for the tenth time, and seems to know everything about how to pack a truck. Ya, moving sucks. 😆
Ahhhh
moving sucks
and yep tha TAG rules
fuck the house is full of boxes
gonna take weeks to settle in
gonna try and set up the network tomorro
wish me luck
also direct tv is coming as well
did I say moving sucks?
SAW
I shut down my Internet connection for a few days and the TAG goes to he’ll
Naw,
We are just givening it a good shake and knock out a few cob webs. It is a good reminder that we care about this place.
Wow
I shut down my Internet connection for a few days and the TAG goes to he’ll
jeez I would have not a prob with a sellers fee
only right
and a Birchers fee too
More whinning more fee
ha, smack dab in the middle of moving
there is a fish pond at the new house
Mr Rockey Racoon has been scooping the fish
2 big ones gone last night
Make shift pump got hammered
Lama gonna need some taxi dermis advice soon
Sat night is the first night at the house
I am on my phone As far as posts go
will stay in touch
Saw
From what I’ve seen, unless it is otherwise requested, he tunes them to the very max fpe that can still maintain the best possible accuracy. Sure, you could try to pull more power out of it. Cygnus has tuned a condor to shoot about 1200fps with 42g eun jins (if I remember those numbers right). He said it couldn’t hit anything, but it was pumping out some serious power.
But now it makes sense. If it’s broken then obviously nothing else matters, and a new one is needed. Blodnob’s valve design is great, I got to play with a buddies blodnob valve that was for a 9mm kit, it was very nice. I’m sure if something is wrong it will get fixed, and after a little bit of tuning that blodnob will be very impressive.
Just don’t break this one. 😉
If you have a Talon you may want to consider a Condor spring and hammer. Or at least the hammer…
Does the Condor have a larger valve orifice? 😆
Condor and fully tuned by Tony 😆
Woah woah woah woah woah woah WOAH.
You are telling us you had a condor that had been completely tuned by Tony, and you bought a blodnob valve to replace the one tony had tuned???????
😆 😆 😆 Sorry guys forgot to mention the only reason why I got the blodnob valve was because my original was broken…
From what selph said was that the hat and valve was stripped…so, i thought hey might as well try out this new valve…so selph is getting my original valve fixed…but trust me if i dont get this blodnob valve working by the time selph sends me the original, I certainly am going back to the original.
Trust me if i didnt need a new valve i would not had spent 200 dollars on a valve…dont have that kind of money laying around when ur 22 years old 😆 😆 😆
I agree completely. Though, I think Tony will tell you that it is possible to get more power out of the gun than he chooses to tune to. Nonetheless, it makes little sense to try and find a couple more FPE if you have no apparent clue how any part of the gun works. I mentioned the 1000psi thing because it seems pretty odd. Especially without any explanation.
😯 I do believe the Condor valve is larger than the one I am holding in my hand right now (B&B Valve)…
Let me grab my calipers…
HEre is what I get from the two valves I have on hand…
B&B Valve opening diameter= 0.198″ to 0.200″
AF Talon Valve opening diameter= 0.11″
Woah woah woah woah woah woah WOAH.
You are telling us you had a condor that had been completely tuned by Tony, and you bought a blodnob valve to replace the one tony had tuned???????
Aren’t you going to ask about why it wouldn’t go above 1000 psi? Or if he replaced any of the other parts that had been tuned to work together? Or any of the other missing information? Oh never mind….
When he said it wouldn’t go over 1kpsi I think he was referring to the new valve. It did that at first and then something gave and it started working.
As to if he replaced other parts, sure, good question.
What I’m really getting at though is why replace anything that had been tuned by tony? Don’t get me wrong, blodnob’s stuff is awesome, I’ve seen it and it does not disappoint. But tony’s guns shoot at the very max of what is possible, blodnobs will do the same but now he is working backwards, he went to a blodnob that will now have to be tuned to his gun.
Am I missing something here? Just seems to me like he went a step backwards by getting a new, untuned valve.
If you have a Talon you may want to consider a Condor spring and hammer. Or at least the hammer…
Does the Condor have a larger valve orifice? 😆
Condor and fully tuned by Tony 😆
Woah woah woah woah woah woah WOAH.
You are telling us you had a condor that had been completely tuned by Tony, and you bought a blodnob valve to replace the one tony had tuned???????
Aren’t you going to ask about why it wouldn’t go above 1000 psi? Or if he replaced any of the other parts that had been tuned to work together? Or any of the other missing information? Oh never mind….
- You must be logged in to reply to this topic.
Lucas is the Prince of Darkness, not the Prince of Carburators.