I know my rifle is accurate, but WTF!!!
Shot some 40 yard groups today, and shot this 5 shot group
Am I missing something here? On a plain fresh piece of cardboard, about A4 size, no other holes, so unless my rifle spontaneously was firing them way off then check this out 😯
5 SHOT GROUP.
The top hole is a little larger than the bottom, so thats where 4 pellets went, the last just under!!
Talk about pellet on pellet!! 😯 😯 😯
All Replies
im nr a little place called evesham. worcestorshire
mate ..,i dont mind doin a grip for you mate miliput paint and time as a one off .for you to feel my work let me know and il give you a address to send it to. bud.
what am i to do about this stem mate .. to be fair i need to wait untill i see it a . i can get one from leupy .unless you know a better bloke..mate ??
No Thats for another air rifle, doesn’t look familiar.
The good stems LOOK like that one in davids picture. Problem with the selphb/david one is -you see at the end of the threading on the stem? Just before it goes to the smooth bit, theres a deep step in it. This is the weak point. Seriously thin. Its here that they break, sometimes after only 50 shots or so. Some have lasted longer, but not much. A proper stem goes from the threaded bit down gradually to the smooth bit, keeps it strong.
That may well be a selphb pic, so maybe that david idiot has redone the stem. I may have heard on the grape vine that David only bought the valve bodies, so maybe he has had to make the stems himself,or whatever machine shop he uses whilst pretending to do the work himself….
mate is this the good stem its on ebay.
Yup, thats the shit stem I’m afraid.
here it is mate.
Fucking sneaky little bastard that david!! 😯
Ok. A true blodnob valve is made but a guy called sean(blodnob)
An american guy called selphb arranged to make seans design over in the usa, cos demand was too high for sean to do what with his normal job an all.
Unfortunately this selphb fucked up the design of the stem, made it too weak and they kept breaking, then he up and disappeared!
This David character brought up a load of the valves from him. Maybe he has redone the stem, you will have to show me a pic of it to be sure.
You paid 130!! Fuck mate, thats a lot. Dunno what sean knocks them out for now, pretty sure it aint 130, I didn’t pay that, but then we are mates so he might have done me a favour.
Don’t panic yet, even if it has a shitty stem, we can sort it out.
yes mate he is..have i been ad pab..cos i havent got a clu about eny valve stems shit .info please.?
iv paid £130 for this valve mate.
his email is dtyne007@hotmail.com he has very nice workmanship evrything looks well made and made to last .il post some pics up ltrs
Whu?? OH you mean david!!! Hes not blodnob!!
David brought a load of shit blodnob like valves from an american guy called selphb!!!
Oh dude, unless the stem has been changed, you gonna haver problems with that!!
Is this david claiming they are his own design!!!!???
ok bud..his name is david pab..not sean,,he is blodknob on here i think.
his email is dtyne007@hotmail.com he has very nice workmanship evrything looks well made and made to last .il post some pics up ltrs
mine has no adjustable top hat on.
this stealth is one with no burst hole in the valve so i carnt fine tune it.. modle number 000717 so mybe it will be better with the new valve on it.
Not much point trying to fine tune if you got one of seans valves coming. PM me when you get it and I’ll give you some help setting it up. I had one for a couple of years.
In the mean time set the tophat to about .070 of an inch.(about 1.7mm)
yes mate i have a cronie im waiting for the valve to come ,,do you mean adjust the top hat to set it just right .?what do i do mate?
Have you got a chrony? You NEED a chrony. This is a non regulated gun, you have to set it just right to shoot good for more than ten shots, otherwise as the power goes up or down, the point of impact will/might change
ok pab i will try tomorrw mate,
im gonna give the 18″ a go again tomorrow as well. il empty the gun using the 12″ see if things improve if not to hell with it will try the 18″
No worries dude.
- You must be logged in to reply to this topic.
Dave_424 can probly make the stem for u