**NEW ORDER ***any interest in 4500 psi condor tank
Im working on getting some carbon Fiber tanks, The manufacture will be sending me some for testing. i will send them to get tested and if all goes well i will get more.
Im just looking to see if there is any interest? These are aluminum core carbon fiber wrapped.
Water capacity: 0.5L
Diameter: 60mm
Working pressure: 30Mpa
Length: 310mm
Weight: 0.6kg
Thread: M18*1.5
Not sure on a price yet.
All Replies
I assume I am shooting way left now, there will be better days,
:popcorn:
OK, I did some cronys, and shot a 9 shot target, and quit, cause the wind was gusting 40 mph. I have the gun right now at PW 4.5, my crony on the roundball is from 834-762, for 11 shots, 3800 down to 2800, on the tank pressure, that is. And still no bell curve, just fluctuation, up and down, between numbers. Heres my 9 shots, the top shot was the 1st shot then I adjusted the scope down and to the left, wind left to right and behind me, 50 yards lased. It may not look thet good, but its swell, you should have been in this wind, jeeze.
Sounds pretty darned Good MAW! Surprised that such a small increase in pressure did so much. Until I re-read and noticed that you turned the pw-wheel down. This seems to happen on a lot of these more powerful guns. Don’t know why, as some say coil bind. But it isn’t compressed enough to get into coil bind. It does have a slightly longer travel at a lower pw setting. But very little. Strange to say the least!
Going to post my preliminary results from this afternoon.
Knife
Hey Knife, 822 with round ball, 143, at 3500, and PW 8.5. Then yesterday, 3650 fill, and PW 5, 863.4, roundball again. I am going to work on getting some kind of a shot count out of this boomer, I am thinking around 800 as a average.
Woo-Hoo!!! Got one in the mail today. Well, I didn’t get to check the mail until after midnight. 👿
Dman, It was in excellent condition! Just need to figure out what to use for the wrap. Kinda hopeing the stock AF bottle cover will work.
Now I can put the Altros Reg. I have put away on the stock bottle for shooting .25 JSB’s. (If I ever shoot a pellet again)! 😆 This .257 bullet shooter just has too much going for it!
OK MAW, what was the velocity before, and what pressure did you fill too?? Was this a full 4500 fill??? 😯 :8:
Walter, that sounds like a fantastic Idea!!! Wonder how the AirWolf would respond to all that pressure. Kinda doubt it would work. but if it did, a Ka-zillion shots!!! :biggrinn:
Knife
It is, Dyotat valve, and spring, with a Tony hammer, and barrel kit from Eldy, only weighs 8 lbs now, thanks to you- dman tank.
45 cal. Sending at 865. !!!!!! Am I reading that right????? That sounds like an awfull lot of power !!!!!
Works good on the Talon 457 SS, had it on power wheel 5 and boomed one out at 863 fps. The 90. 3 grm. hammer is going to work out just fine. Thanks dman I couldn’t be happier and installation was cinch with grinder and sanding disc.
Thanks
Boy oh boy!!!!!
Gonna use it on a Cometa Lynx 25cal for lots of regulated shots!!!!!!
if that doesn’t pan out then use it on my Condor in 30cal
Walter….
yup Your all set walter….. Its on the way check your PM’s i sent you the tracking info.
Thanks
Sent from my SCH-R970 using Tapatalk
ok… I may have an extra from this batch… don’t know yet. gonna give everyone some time.
Pan… do u know what size the threads are on the gauge for the condor?
Waiting for confirmation on my Paypal payment sent yesterday.
Jaime, did you receive it and tank is on its way?
Cheers,
Walter…
No doug, I don’t think you did post the numbers with the higher fill pressure. If you did, I missed it. Soooooooo Post already! 😆 😉 😀
Knife
I only have 2 heavy hammers a 90.3, which openned the valve 3500psi. on pw 8.5, and 108 gram hammer, which seems too big for the slide action, cause it is not barrel riding like yours are, how much do you sell a 130 grm hammer for anyways? I will be testing soon and if all fails, I’ll be checking this with you.
- You must be logged in to reply to this topic.
The wind here today was a booger!!! 👿 but managed some chrony work and a little target shooting.
FPS on the 60 NOE .257 was 1020+ with a slight bell curve and ended down at 990. Way better than I expected. This was with a 3850 fill down to 3400 fill in 9 shots. Woo-Hoo!!! 😀
This is 90-100 fps better :8: than was able to get with the factory bottle at 3000- 3200 psi in it for 4-5 really good shots without any shift in poi.
Knife.