**NEW ORDER ***any interest in 4500 psi condor tank
Im working on getting some carbon Fiber tanks, The manufacture will be sending me some for testing. i will send them to get tested and if all goes well i will get more.
Im just looking to see if there is any interest? These are aluminum core carbon fiber wrapped.
Water capacity: 0.5L
Diameter: 60mm
Working pressure: 30Mpa
Length: 310mm
Weight: 0.6kg
Thread: M18*1.5
Not sure on a price yet.
All Replies
Seriously, that would be more hammer then I’ve seen, that must really mean people, may need a big, big hammer, I am just trying to get a bell curve for a few shots and tried 3500, so I may not get the valve open at 3600psi. never gave it a try at all.
I guess I didn’t post the numbers for .257 on 3950 psi. I did both my guns on hpa. The only problem is you need a 150 gran hammer to open the valve.
Several of the .257 shooters have been wanting to experiment with a higher fill pressure. The Haleys and other big bores use a much higher fill pressure. The thing holding us back, has been the lower fill pressure of the AF Bottle. This should prove interestiong to say the least!
Now If Doug comes out with a reg with say 3000 to 3200 out put, this is going to be sweet!!! :8:
Thanks once again for doing this Dman! It will open up a new chapter in the Talon/Dor’s!
Cedric, you listening??? 😀
Knife
1/8″ NPT male
I would have to look when I get home I have a video on how to convert spinlok to normal the thread size should be in that video
Sent from my SCH-R970 using Tapatalk
Sent from my SCH-R970 using Tapatalk
ok… I may have an extra from this batch… don’t know yet. gonna give everyone some time.
Pan… do u know what size the threads are on the gauge for the condor?
Well if you order more please put me on the list as soon as all the snow melts I will be back to work and have the money for one
Sent from my SCH-R970 using Tapatalk
Cool.
Looks nice and easy
Sent from my SCH-R970 using Tapatalk
i just hit it with a file, Nothing special… Ill touch it up later. gotta touch up the stock too.
I got the 45 that needs 3700psi of air, I’m hoping this will achieve my expectations.
Make me wish I had the money for one right now. I just gave a friend a new talon all set up as a gift so now I’m broke lol
Sent from my SCH-R970 using Tapatalk
Oh hell yeah. Looks good to me. Will we need to break out the Dremel tools and files to fit them?
Did you have to cut the frame if so can you post a pic without the tank on so I can see how you cut it it looks great
Sent from my SCH-R970 using Tapatalk
- You must be logged in to reply to this topic.
You could probably get away with 120 gram hammer if you only want to open 3600 psi. I can open 4000 psi on PW 8 on the .257.
On my .25 with 105 gram hammer I could open 3500 psi with PW maxed. You have a .25 valve so you might get by with 110 gram. But if your going to do it you might as well make it so you don’t have to max out the PW.
I run 150 gram in both .257 and .308. The .308 will open the valve at 4000 psi with 0 PW.