OMG My New Lelya 20 cal ….
:8: …. BEAUTIFUL it’s wood (dark and highly figured/curly), thank you very much Tony !
I’ll see how it shoots .. if it shoots … as good as it looks … when the scope and tons of 20 cal ammo comes in soon.
Thanks for the l@@k see ……… and more info to come !
~ Greg
All Replies
.
Cleaned all contact points with denatured alcohol and applied a light coat of Archoil AR8100 to the sear and trigger contact points.
Weeks ago application was done also to the slide breach and hammer spring and guild.
http://www.archoilcart.com/ar8300-half-oz-syringe-severe-duty-biodegradable-synthetic-grease.aspx
Decided on doing my Nylon Trigger Mod to my Lelya as well.
It’s the same modification I did to my Matador trigger so I reused the pictures from that.
http://www.talonairgun.com/forum/viewtopic.php?f=34&t=33456&start=20#p343106
Modification to your tigger at your own risk.
I found this nylon bushing it measures 3/32″OD x 1/8″ID x 1″ long, the actual is .195″ OD x .12″ ID.
The pin is 3mm in diameter and .12″ is very close.
The one used for my Lelya was cut to 7.77mm long.
Before adding the nylon bushing I turned out the sear engagement screw by 1/2 CCW.
Punched out this pin (forward trigger stop) and install the nylon bushing onto it.
Cocked and applied the bump test.
Now the first stage pull length is about 1/16″ long with no pre sear takeup which vary from shot to shot.
Cocked and applied the bump test and the pull weight is about 7 oz very consistent, clean crisp break.
~ Greg
.
Been shooting/pesting at the farm with my Lelya theses couple of day with little wind forecasted.
The farmers gave us some fresh chicken wings to take home for our good deed.
We like this Asian recipe it’s more of an appetizer, great for parties because you can have it prep/marinated the night before.
You can use less garlic if you like, pop them in the oven and fry them up and ready to eat in about 30 minutes time.
First batch ….. yum !
Batch 2, for our neighbors ……. Yum, yum !!
~ Greg
Actually it’s not mine… stock is painted in a similar way as mine but I’ve never had .20 cal Lelya. But it looks cool!
Yes I have been corrected ……… … cool Bounty Hunter logo.
Since it’s had a previous owner Airbrained could update it with a red swipe.
~ Greg
Actually it’s not mine… stock is painted in a similar way as mine but I’ve never had .20 cal Lelya. But it looks cool!
Try to polish the barrel.
It is what it is, cheap. …… but small and light.
Comparable to the old bugs glass just with twice the power enough for pesting but not for target shooting at 50+.
Wire rad is much thiner than on the old bug.
Side focus is a definite plus !
But I’ll be on the lookout lfor something with better glass that won’t kill my wallet.
– Greg
thanks. i will probably get one, may end up on the p-rod if i don’t like it on leishy or mutant.
.
If I tune to above 800 fps mines starts to bark a bit.
Hey nice pichures. …. you need to sell me on the Huma reg upgrade. :biggrinn:
– Greg
Ok Greg here’s a little more Lelya love for ya…. I was able to get off work a little early today so I headed over over to my permission to do a little paper punching followed by some hunting. I dialed the Lelya in to shoot the JSB Exact .20cal. 13.73g at avg.815fps for approx. 17 shots. I currently have my Athlon Argos BTR 6-24×50 FFP scope mounted on her but would also like to use something a little smaller, anyways here’s some more pictures from today. https://image.ibb.co/hrTs56/1_EFBA183_2_D59_48_C6_8_A96_8_E943_ACD45_D4.jpg https://image.ibb.co/jOTEJR/F93579_B2_9_D2_D_47_A8_BB8_B_4_E07_F1_A5235_F.jpg https://image.ibb.co/kNxzJR/06_C88896_5_F7_F_4_FC4_B6_B9_54_F24_FCBB348.jpg https://image.ibb.co/gMCYdR/35_D1_F4_B5_F06_E_43_BC_A0_C8_2_C24_A26644_A3.jpg https://image.ibb.co/jyXMXm/FFB3_E7_A4_C3_C4_4_C5_A_AC4_E_B56583_CE9_CA6.jpg https://image.ibb.co/n3sYdR/C5_C5_B8_F1_49_E1_4949_BB9_B_98_CAB797583_F.jpg https://image.ibb.co/f6yBXm/7_E3_D2_CA8_2370_4_AD3_9_B89_9853_CA1_B7_E45.jpg. This last picture shows where I zeroed my scope at 50yds and once dialed in I proceeded to put 5 shots into that little hole I’m pointing at in the photo, BTW I’m not the best shot, and for shits and giggles I did some 100yd shooting and was amazed to see I had dropped 3 pellets into a group just under an inch. https://image.ibb.co/n3rjJR/3_C941_E98_0769_4_BD5_9680_8_A1_A551445_F5.jpg So far so I’m really digging this little Russian pup and after I gather some more data using the factory EdGun reg I’ll move onto the Huma reg install and I’ll be able to compare notes on Factory VS. HUMA as far as shot count and consistency is concerned.
Yes ……
It is what it is, cheap. …… but small and light.
Comparable to the old bugs glass just with twice the power enough for pesting but not for target shooting at 50+.
Wire rad is much thiner than on the old bug.
Side focus is a definite plus !
But I’ll be on the lookout lfor something with better glass that won’t kill my wallet.
– Greg
How do you like the bb? It’s the new 3-12x right?
.
Pesting today early just at sunrise was in need for a 25 cal because of the forecast for wind gusts.
But I bought my Lelya 20 cal and first thing sighted in the Hawke 6.5-20 circled in red 4 shots.
Lasered out to 50 yards and targets are leveled …… here is my 2 – 6 shot groups …… with JSB 13.73g @ 800 fps filled to 210 bar to get 20 shots.
Target on the left … is nothing to brag about but to blame the wind. :biggrinn:
Not going to show a picture of my Lelya with a 16″ long scope on it … remounted the BB.
~ Greg
.
aw, here it is Dan’s Lelya … …. ..
http://talonairgun.com/forum/viewtopic.php?f=34&t=33424&start=40#p347738
~ Greg
I don’t think is PiterM’s Lelya, the gentleman I purchased it from says he used the idea of the Star Wars stickers on the stock from another TalonTunes member and I think he’s referring to PiterM’s Leyla. Anyway she’s shooting HOT!!! Avg. 865fps.!!! I’ll be tuning this little pup for a nice balance of shot count and energy. The HUMA reg came pre-set to approx. 120bar so I’m hoping that lower reg pressure combined with the smaller sized reg will give me a few extra shots. I didn’t shoot a full shot string because my children are sleeping and you can hear the sound of the pellet hitting the pellet trap through the vents in my kids room,LOL, and my wife don’t want play that shit. More data to follow, I might even film the reg install so we can at least have one in English. Well I suppose Wingman’s EdGun Veles Huma install video is pretty much the same thing just in a pistol format. https://image.ibb.co/jpZpiG/F3_D2115_A_6_BA7_4_C94_9781_16_A12_BEAA027.jpg https://image.ibb.co/e3JtAw/8_EE3_BFAF_5635_4_C7_A_A6_C6_1_DDD23_BA5_E4_F.jpg https://image.ibb.co/knjN3G/35_EB2_F24_53_FB_4_C63_A72_A_41_E67_BB66_A18.jpg
I don’t think is PiterM’s Lelya, the gentleman I purchased it from says he used the idea of the Star Wars stickers on the stock from another TalonTunes member and I think he’s referring to PiterM’s Leyla. Anyway she’s shooting HOT!!! Avg. 865fps.!!! I’ll be tuning this little pup for a nice balance of shot count and energy. The HUMA reg came pre-set to approx. 120bar so I’m hoping that lower reg pressure combined with the smaller sized reg will give me a few extra shots. I didn’t shoot a full shot string because my children are sleeping and you can hear the sound of the pellet hitting the pellet trap through the vents in my kids room,LOL, and my wife don’t want play that shit. More data to follow, I might even film the reg install so we can at least have one in English. Well I suppose Wingman’s EdGun Veles Huma install video is pretty much the same thing just in a pistol format.
- You must be logged in to reply to this topic.
Damn Greg, between the Leyla pics and the chicken, I’m drooling!
Airbrained, You on the east coast? The Sycamore leaves, Ash, Locust and dead Ailanthus trees sure look like VA.