Veles, Lelya, Morana, Matador .30.
Dear friends,
We started production of the following guns:
1. EDun Veles, short, caliber .177, walnut or soft-touch grip, right handed, moderator.
2. EDun Veles, standard, caliber .20, walnut or soft-touch grip, weaver base, right handed, moderator.
3. EDun Veles, standard, caliber .22, walnut or soft-touch grip, weaver base, right handed, moderator.
4. EDgun Lelya, walnut stock, caliber .177.
5. EDgun Lelya, walnut stock, caliber .20.
6. EDgun Lelya, walnut stock, caliber .22.
7. EDgun Lelya, walnut stock, caliber .25.
All Veles and Lelya are single shot guns.
1. EDgun Morana, long, cailber .25, walnut stock, multi shot.
2. EDgun Matador, standard, caliber .30, walnut stock, single shot.
3. EDgun Matador, long, caliber .30, walnut stock, single shot.
Expect them to be ready to be delivered in Janury/February (if will be possible make it earlier, we will do it). I will deliver dealers in US only based on their order. So if you ever planned to get some of those guns, contact US dealers and reserve the guns.
Ed
All Replies
Does this mean the Veles will have the mod?
I want mine as Ed ships it, without anything other than the OEM shroud. The Leyla’s beauty is being short. A permanently glued moderator would be a problem with that. Better to just thread the shroud so something locally made could be added as necessary.
Hoot:
Does this mean the Veles will have the mod?
Who’s mount is that FUDD, It looks to have the Burris type locking levers but a little lighter weight maybe ?? Clean, I like it.
….
The Burris is available with QD as well. I’m sure they are all good but I lap and bed my scope bases and prefer the bases and lower half of the ring seats all being one piece designs. See below.. $102.00 and available with smooth top rings too. There are some china made cheapo options available that I do not like the lock up on also, tried them all. The Burris and Leupols are just hard to beat. I already spent too much on expensive rings to lay on the shelf 🙂 Gotta go with what I know works for me. Weight is the only thing that may make me stray.
Bobro… they are supposed to kick ass:
http://swfa.com/SWFA-Precision-Optic-30mm-Mount-P48134.aspx
http://www.bobroengineering.com/view/product/7/reviews/
Single QD and (alleged) near perfect rezero with reattachment. I remember reading some pretty impressive field reviews. I’ll post when I find them.
2X the cost of the Burris, but if you can move from gun to gun quickly and easily it is worth it IMO.
I don’t own these but they look nice in my opinion. Not too bulky.
I am thinking a cantilever Burris PEPR set up and letting my two Lelyas share this March Scope. I have one of those mounts already and it comes on and off it’s gun with great success. My gut tells me I might be within 5 or 6 clicks moving it back and fourth. It tracks flawlessly so a cheat sheet of what each gun likes is a lot cheaper than two of those scopes for now at least.
..
[/quote]
Lelya is a babe! I was thinking of using qd rings that might 86 using a IOR scope with 35mm rings, but I’d like to be able to stick a pulsar n550 nv scope on her. Still have some time to figure it all out though 🙂
Ok if we’d permanenlty gule the SM onto the airguns there should be no problem.
Nightforce 2.5-10×24 is another excellent option for Leyla. No parallax adjustment but it works perfect down to 15 yards. I prefer no parallax on centerfire hunting rifles, one less thing to mess with.
Standard Edgun fill probe should be included. Cap on the end slides down half way or completely off while filling. Otherwise just like matador. Rings,… UGG I would rather not talk about it but since you asked ….. I decided to step up big on rings and a friend loaned me some Leupold rings to try but i said I’ll just buy them buy sending you some new ones just like them with a gun he was buying from me. They were too low Leupold aluminum rings $135 ish. I thought. Well they were too short so I opted to buy another set of the Mediums, another $135 ish again, and when they came in they were a perfect match for my supposed low rings that were always Medium in the first place Crap two sets laying here. As hard headed and stupid as I am I just about ordered a set of high versions but feeling dumb as shit and broke I just went out into the shop and grabbed a set of new in the box $13 rings Amazon China rings and put it together. I want to swap them out but still stinging from stupidity and will read and check the Leupold HIGH ring specs first when I get around to it. No Z rings needed but make sure they are high enough, lelya pulls up differently and the scope unfortunately needs to sit high up to get a good eye alignment. Expensive Gun + Real Expensive Scope + $13 china rings = dumb ass. 😳
I wanted to make up some crazy story for :hoot: about lelya taking an extra large probe that she takes up the rear of her main air tube but I am just not creative enough to come up with that kind of shit and compete with him. :biggrinn:
..
Scope height is perfect for me at 1.5″ scope C/L to top of the rail as In this picture.
P.S. taking this picture reminds me that when I do re-buy rings I will buy a cantilever mount for best fit. I don’t like the out of balance look. The leupold Cantilever in the previous pic. in the window sill with the original scope was a 1″ and the March is a 30mm, …. of coarse, never a break.
..
Does the Lelya come with a fill probe? What kind?
Hoot:
Ridetoeat,
Does one need z-rings for the lelya?
Sounds like you guys will be having a Lelya beauty pageant in the upcoming months. I wonder who’s going to dress up her up the prettiest although I opt not see Hoot’s after the unboxing party and the lights go out.
- You must be logged in to reply to this topic.
Does this mean the Veles will have the mod?
I want mine as Ed ships it, without anything other than the OEM shroud. The Leyla’s beauty is being short. A permanently glued moderator would be a problem with that. Better to just thread the shroud so something locally made could be added as necessary.
Hoot:
Add me to that list! Leave my lelya stock please!