Vulcan shooting down 110 fps
Put the Vulcan over the Crony this weekend the velocity was a 110 fps slower then the first time I Crony’d it which was verified by Talon Tunes with 18.1 JSB. Spoke with Greg first who gave me some idea’s I did everything but check the barrel placement which Evgeny asked me to check today. And it’s not that, the grub screw is lined up with the indent in the barrel. I also did a physical inspection of the Breech O’ring which is in place and then I checked the transfer port with a kleenx for a possible leak of that O’ring. All looks good. Called Talon Tunes left message no call back. Any idea’s please leave me some feed back. I messed with the HST nothing there either.
All Replies
Where is the spring coming from. Tony or oversees
Sent from my Z30 using Tapatalk
WTF???? I couldn’t……Evgeny must have had a chat with Tony like he said he would…..
Bad spring after couple of hundreds shots? 🙄 😯
New main spring on it’s way to NY compliments Evgeny his exact words to me if this does not work send it back to Tony for warranty repair.
maybe
Maybe it’s a bad spring. Check hardware store in the morning
Sent from my Z30 using Tapatalk
No lube E. Striker moves freely now that I removed the main spring
Can you check and see if hammer slides freely. Did you by any chance lube the hammer or did any lube or oil get into cavity?
Took the main spring out and measured it as Evgeny told me too he said it should be between 44-45mm my spring measured in at 43mm and to boot the manual shows a striker bushing part 107 and I did not find this part in my gun? When I got Zonks Hagan tool I adjusted the HSTA and got the FPS up to 870 but the I made three or four full turns. This gun was shooting 910 when I got it and the HSTA was flush.
disappointing news… gone is the perfect thing..
Heck I think Leads right
That’s :hoot: drying his ass dipshit!
He’s the only forum member that wears Jesus boots anyway
:
Mine didn’t come with a hole for a lanyard. Is this a QC issue? 😀
I drilled the hole–so no QC issue!
Oak I’m the one with the clothes on you Wacko
- You must be logged in to reply to this topic.
We are not 100% certain. It’s a 1 mm off the correct size