Vulcan Side cocking lever by Airgun Technology
Hi guys
Just saw Evgenys post on Facebook, he has made side cocking lever for Vulcan. It will fit all the generations of Vulcan and Tactic. Can be fitted on left or right side. 100€ plus shipping.
To order contact Evgeny at airguntechnology@gmail.com
All Replies
:hoot:
Dear Homo-bux…
Did you guys have a water shortage, like the fruits and nuts further South of your state?
Hoot:
Not too sure on the shortage, but half the fruits and nuts you mentioned have moved to this state. Luckily on the west side. the only problem is that the westies are starting to make their escape to my side and bringing their liberal ass ways with them. :biggrinn:
It’s spreading up the west coast Hoot…..
:hoot:
Dear Homo-bux…
Did you guys have a water shortage, like the fruits and nuts further South of your state?
Hoot:
Mine should be here late next week, but with a foot of snow and 14*, who’s counting.
:hoot:
Ditto…let us know if you have any more questions!
Hoot:
:tag: pocholoss
I will receive my sidelever and moderator tomorrow ordered to evgeny if the mexican mail doesn’t loose it on the way and install it on my new .22 Vulcan bullpup that just received yesterday, thanks for all the information in how to mount it on both sides, lets see on what side fits the best for my shooting
Enviado desde mi iPhone utilizando Tapatalk
Neatly done, hazmat!!!
Nice pictures to illustrate as well… :8:
Hoot:
Sir your post is the guide that I followed. Many thanks for sharing the knowledge.
Eelect, it’s only going to get better with the spring coming. It’s a bird magnet come spring. That’s when I take my air bottle and 500 pellets for a morning shoot.
:hoot:
Neatly done, hazmat!!!
Nice pictures to illustrate as well… :8:
Hoot:
Received the side lever today. It comes setup for installation on left side of the gun.
I will be installing it to the right side so had to invert the setup
To flip the cocking lever, pin fixing the lever to the base needs to be removed. There is grub screw that holds the pin in place. Removed the screw. This pin and screw will be installed in the adjacent holes in order to make it right handed.
Pin slid out of the base and the lever was removed from the base. It will be installed in the adjacent hole for right hand configuration.
Next flipped the handle on cocking lever
Finally everything put back together.
Will be installing it on Vulcan Tactic I am getting soon 🙂
Time to do some starlings population control Zonk!
I know what you mean Awny, doing it now!
Zonk you should be ashamed of yourself. How can you let those starlings populate that much!
I know what you mean Awny, doing it now!
DANG!! I’d love to have a place like that to shoot! I’m doing good if I get 2 or 3 off my Martin Boxes before they wise up and leave… I did get to take out another pig and some turtles with my vulcan though this past weekend… Lovin’ my Ernest tune, but I’m thinking I may still have a slow leak somewhere… Can’t detect a visible pressure decay, and it may have been because of the low temps this weekend… Sure hope I don’t have to tear into it again because it is shooting lights out!
Sent from my STV100-1 using Tapatalk
Time to do some starlings population control Zonk!
I know what you mean Awny, doing it now!
Zonk you should be ashamed of yourself. How can you let those starlings populate that much!
I know what you mean Awny, doing it now!
DANG!! I’d love to have a place like that to shoot! I’m doing good if I get 2 or 3 off my Martin Boxes before they wise up and leave… I did get to take out another pig and some turtles with my vulcan though this past weekend… Lovin’ my Ernest tune, but I’m thinking I may still have a slow leak somewhere… Can’t detect a visible pressure decay, and it may have been because of the low temps this weekend… Sure hope I don’t have to tear into it again because it is shooting lights out!
Sent from my STV100-1 using Tapatalk
Time to do some starlings population control Zonk!
I know what you mean Awny, doing it now!
DANG!! I’d love to have a place like that to shoot! I’m doing good if I get 2 or 3 off my Martin Boxes before they wise up and leave… I did get to take out another pig and some turtles with my vulcan though this past weekend… Lovin’ my Ernest tune, but I’m thinking I may still have a slow leak somewhere… Can’t detect a visible pressure decay, and it may have been because of the low temps this weekend… Sure hope I don’t have to tear into it again because it is shooting lights out!
- You must be logged in to reply to this topic.
It got here a couple days early. I have some high grade RC hex drivers, so taking the little screws out was a breeze. Even actually have the correct torx bits. It was a breeze to do and is awesome ! Smooth as butta. Too bad it’s snowing & 17*. :sadn: