Condor Valves
Well it is finally happening. I know some of you have been waiting patiently for one. Second piece is there and waiting for a machine to become available.
Put them all in the lathe to scotch brite the threads. will put the hole for the VRT and then off to black oxide.
All Replies
Shit dude! That Sucks!!! 😯 Glad they got it our before the whole thing went!
Mike
This is now called thread jacking, started the lawn tractor in the shed and 8 minutes later it was on fire. I tried to put it out but could not and the flames went into the attic of the house like 20 ft by the time the firemen got it out.
Thanks MAW!
Why the hell did ya go and burn the house down? 😯
I was in a dinky apartment for 3 months cause I burn’t a quarter of the house down and 2 sheds, good shootin to you and Ol Goat… Knifemaker.
I got out my old caliper and I got .2470 and that was tight, so I would guess .2475 LW I think
What barrel do you have?
AGrrrr!, The Wait is kill’n me! 😥 But I have a feeling it’s gona be sweet!
Just about every where I look, casting supplies are BACK Ordered— 👿 I wanted to try and add one piece at a time. May be some items will turn loose soon. 😉
And Howdy MAW! OldGoat and I were just talking about you. How ya doing?
KnifeMaker
.249
What size is your barrel? Have you sluged it. Need to know to size them.
Well can you sell me acouple hundred and send them to me when you ship my valve? The good ones 76.
I don’t have any thing around 70 right now. I have 74.5 and 76.5.
76.5 works real good. Not 100% sure on the 74.5.
Jerry’s slugs work good but I know he is getting new molds and not sure when he will have them.
Ya, I would like to get some slugs for my 25, so if that is possible let me know, where, when, and how much, .251 size, around 70 grns.
Ok I will have 15 valves ready to ship on the 10th.
Who else wants one?
.25 valve works on standard AF gun with a heavier hammer. You can grt more with .257 valve but you need to start with a new barrel.
I got 984 fps with 74 gr with my 24″ barrel in the. 257.
Barrel is .375″ at the breech instead of .308″. I could have probably got 1000 fps but once I dropped in the .257 barrel there was no going back.
- You must be logged in to reply to this topic.
Whats the max psi to be used on one of these valves. I have some 4500 paintball tanks and just wondering if Id be better off using one of my 3000 output regs or without.