Q:

EDIT: Leaky probe on .30 cal EDgun – The FIX is HERE!

Hi guys. Anyone have a few of 5.5mm x 1.5 buna 70 that you can send me?

I’ll pay all the costs. I need them pretty bad and oring store is out of stock.

Peter

EdGun

All Replies

Viewing 7 replies - 76 through 82 (of 82 total)

1 2 3 4 5 6

OG – did you notice if the 90 dura 5 x1.5 Buna N O had any effect on the noise? I have a few of them to try if so.

Thanks!

quote oldgoat:

F&D and FDA, if both of you guys would email me your mailing addresses, I would be happy to send you both a few.

hdtb3@msn.com

Thank you Ted!!!

F&D and FDA, if both of you guys would email me your mailing addresses, I would be happy to send you both a few.

hdtb3@msn.com

Yeah. Mine leak too. Ed recommended 5.5×1.5.

OG can you send me 4 duro 90 5×1.5 rings. I’ll pay shipping and cost.

Both the stock o-rings and the extra set leaked badly on mine.
Ed recommended the 5.5 X 1.5 O rings and offered to send me some.
I will find some on my own and try them out.
Perhaps being my gun leaks worse than yours they will work.
Sounds like a 5.25×1.5 might be the ticket.

F&D; if the 5.5 X 1.5 O rings are for the 30 cal cocking handle probe: they are too big and the bolt won’t close fully. The stock O rings on my 30 cal were slightly leaking, I put the 2 spares that come with the gun in and ordered some 90 duro O rings.

I have some 5.5 X 1.5 70 duro Viton O rings and I gave them a try on the probe. In my 30 cal and they wouldn’t work for me. They were a loose fit in the probe’s grooves and they were too “tall”, and moved around too much for the probe to fully seat. Your mileage may vary!

I just got some 90 duro 5.0 X 1.5 Buna N O rings in today. I got them from the O ring store.

http://www.theoringstore.com/index.php?main_page=product_info&cPath=368_52_1002&products_id=24524

I think that I have your address but; just in case I don’t, send it and I will send you a few. Or; the O ring store is in Idaho and you might get them quicker by just ordering some from them. Either way will work for me.

One of the reasons that I started the Matador group O ring buys was I thought that everybody would eventually need some 90 duro Buna N O rings for the cocking handle probe.

John has taken over the Matador group O ring buy and he is currently waiting for me to measure the extra O rings needed just for the 30 cal.

So far, I have found 5 new sized O rings that that sneaky Ed uses just on the 30 cals.

Nevermind. Found some on ebay and bought them.

Viewing 7 replies - 76 through 82 (of 82 total)

1 2 3 4 5 6
  • You must be logged in to reply to this topic.