Q:

Hammer fix

Lately I’ve noticed with 25 Vulcan the 40-50 and beyond yard shots where not slam dunk anymore. Well this morning after a horrendous outing I figured I’d better look into it.
I whipped out chronograph and viola the answer was clear. First it was shooting 880-990 to start off with. Last time I checked it was 930 or so. So I took your the hammer screw and was able to move velocity around but not consistent at all. Extreme spread was 25 and then some. My 80 yard groups showed it too. So I took it apart but had to reverse drill out two of the screws holding the side plate. (thanks Zonk for the 2 spares you sent me) I took hammer out and wiped it clean. Then I noticed the one end where trigger catches hammer was sharp. So I smoothed out the edges using a drill to spin hammer and taking some cloth to the edge.

While I had it apart I figured I might try to do something with hammer spring too

I put it to the test through chrony and settled for 920 with es of 2 with 20 shots tethered to my tank. Major improvement to say the least.
I went and did a accuracy test and it puts 3 pellets through a hole not much bigger than the pellet at 50 yards.
I’m so happy to have my Vulcan back to its usual self.
The piece on the spring is a rubber grommet that you use to insulate a hole to pull wires through. I can’t hear the spring at all. Problem is my gun got louder. Lol

Sent from my Z30 using Tapatalk

Airgun Technology

All Replies

Viewing 15 replies - 76 through 90 (of 114 total)

1 2 3 5 6 7 8

:hoot:

The constipation I can understand. The “Weird” I don’t understand….you’ve had stranger things than a cork up your ass!!!! Or did you forget why you had to leave Finland in the middle of the night, and flee to Sweden where they have a more open mind about “people with alternative lifestyles…“. Remember that statement on the emergency room police report? I certainly do! Or did you forget what a Swedish Emergency Room charges for an “Emergency Gerbil Removal/Rectal wall Reconstruction”.

In your defense, how were you to know the damn thing would panic, and try to chew its way out the side…in this case ‘your side’…

Fond Memories

Hoot:

Done! Now i feel constipated and weird. You bastard!
Don’t forget to take a big breath of clean Swedish country air when you open that envelope marked ” caution anthrax inside “. Enjoy !

:hoot:

You are an idiot…and those oily ass prints have nothing to do with your computer…you’ve been drinking too much herring oil. I warned you about that before…but NOOOOO, you didn’t listen…now you are leaking oil!!!

Buy a cork, and eat a sponge!

Hoot:

I have been sitting the whole day with my ass oiled and waiting. Didn’t help!
Little did i know that the Laptop was the one that needed oiling. Now i oiled it and voilá – the message became readable.
I feel like an idiot now and my wife wonders why there’s oily ass prints on the couch ..

quote oakey631:

Good for nothin except canoe rides. Fake ass Swed

Vile….PM me your address!

Then oil your computer so the damn thing will open my messages to you!

Hoot:

Good for nothin except canoe rides. Fake ass Swed

General delivery goes fine and Sweden is now a state. Bordering on Arkansas.

:hoot:

Fuggit…it’s going to “Ville the Vile” G/D Sweden, U.S.A. (My neighbor said Sweden’s not a state yet, so *General Delivery* should get it there ok.)

Hoot:

I live in the palatial Casa de Ville just beside the neighbour.

Let me check Hoot I have Villes address some where……

quote Sir Ville:

I just came back from the Post Office . Your items are on their way to Toad Suck , Arkansas together with a small amount of Anthrax.

He lives on that krap so it won’t do a damned thing to the man :hoot: who sniffs Viagra and Formaldehyde for shits and giggles.

I just came back from the Post Office . Your items are on their way to Toad Suck , Arkansas together with a small amount of Anthrax.

quote Sir Ville:

Ernie, you magnificent fool : Do you sell those Delrin thingies to anyone or just to the Uncle ?? If you do and if you have other bits for the Vulcan then i´m interrested in buying them. Now. I want to tinker with my Gun since it haven´t been used for a good while and may feel left aside.

:hoot:

Dear Shriveled Nuts…

PM me your address, and pictures of your daughters, or your cute wife for that matter, scantily clad, or naked, and I’ll send you my Delrin mod. I can’t use it. The only place it will fit in my .25 is the shroud, I would have to take out other things I put in there.

Kind regards….(not really, unless I get those pics)

Uncle Hoot:

Again ? You’re borne that way.

I was a bad squirrel again

Viewing 15 replies - 76 through 90 (of 114 total)

1 2 3 5 6 7 8
  • You must be logged in to reply to this topic.