Just ordered a Short one
From Tony, it should arrive in 2 weeks or so after he test shoots it.
I can’t wait, in the mean time what to crown the little one with, a Bug buster ?
~ GKU
All Replies
Greg,
It was my typo. 😳
I meant 765-770 fps for Petr’s barrel. His barrel has a very tight choke.
Endo
I think u waited to the right time moment into getting one Coda, the Shorty rocks !!
~ Greg
For the barrel sent by Petr, I got 865-870 fps with JSB 18.1, without changing HST the factory CZ barrel (from Randy) goes up to 790-795 fps.
I am getting a 2nd Gen Listone barrel from Dman…we will see.
Gee 75 fps lost, was the Petr barrel Choke less ?
~ Greg
It’s a barrelorama! 😯 I am feeling awfully lucky on my Short Mutant.
Greg,
For the barrel sent by Petr, I got 865-870 fps with JSB 18.1, without changing HST the factory CZ barrel (from Randy) goes up to 790-795 fps.
I am getting a 2nd Gen Listone barrel from Dman…we will see.
Thanks Endo,
I’m also glad to hear that you got one also, cool beans Sir !
With the hammer spring adjuster at the same setting with a direct barrel swap I had about a 10 fps increase with the CZ barrel.
The TP is larger in area then with the Listone which is .18″ round compared to the CZ .2″ x .183″ oval.
I believe they’re trying to make up for the velocity lost with a choke barrel with such a large TP.
With peck hammer spring setting the Listone the maximum velocity with JSB 18g = 805 fps. 16g = 845 fps.
Now with the new CZ max velocity with JSB 18g = 815 fps, 16g 850 fps.
I’m just waiting for sunrise to test shoot, but don’t think it will out shoot the Listone barrel, it’s that good.
~ Greg
Congrats Greg. My measurements are similar/identical to yours.
Regards,
Endo
Just received my CZ barrel from TAG Tony today :8: , it looks great but haven’t test shoot yet maybe tomorrow.
Here are the 3 barrels from top to bottom, CZ, Listone and the German/Korean barrel.
CZ barrel TP specs, quite large for a 22 cal.
~ Greg
73 omg. Kug? 🙂
I ride adventure bikes with a guy who is 76 in the Ozarks (I am 58). He is one tough old bird. Retired from the Navy.
😆 only one meaning that I know of …….. Sir ?
~ Greg
:hoot:
Dear KUG,
Never stare a toad in the eye! And…when you are in doubt about anything in life…stop what you are doing and ask yourself “Can you tell how fat a chicken is by looking only at it’s head???” Reflect on these matters when life deals you a bad hand and you will emerge the better man!
There you have it. The sum total of 73 years of life experience.
Kindly Ol’ Uncle Hoot:
PS: No need for thanks.
For who and what STD does this mean ?
😆 only one meaning that I know of …….. Sir ?
~ Greg
. …. .. .. we’d/I’d like to know what’s making it tick ? 😉
~ Greg
:hoot:
Right!!!
What STD said…let Dman do a complete exam, and administer an enema on this sucker, and see what is going on in there! It could have worms, or even a dead rat gumming up the works! Just saying…..been know to happen.
Hoot:
Res erected from the dead.
. …. .. .. we’d/I’d like to know what’s making it tick ? 😉
~ Greg
:hoot:
Right!!!
What STD said…let Dman do a complete exam, and administer an enema on this sucker, and see what is going on in there! It could have worms, or even a dead rat gumming up the works! Just saying…..been know to happen.
Hoot:
Greg I’ve never had my gun apart, or adjusted any thing.
Keep this great post going. 
Send it to Dman for a full and down right autopsy……. …. .. .
. …. .. .. we’d/I’d like to know what’s making it tick ? 😉
~ Greg
- You must be logged in to reply to this topic.
My Donny Fatboy mini review.
If you are interested in getting one you can contact Donny here on TAG or email him directly donnydu@gmail.com
Received it in perfect condition, I like the Matte l@@k the best ! :suprisedn:
The inners of the fat one is just as neat ! :8:
I received my Mutant LDC adaptor with a black Delrin tread protector tip cap from John Hagan if you are interested in getting one he can be reached at hagantool@aol.com, he responses very quickly like Donny ! :fishinghole:
John seemed to have used an anti seizing compound of a sorts or Moly lube on the treads is always a good ideal when dealing with two different metals.
I notice that the OEM metal dowel pins don’t fit into the Hagan LDC adaptor, it has a different size hole about a 1/8″ drill bit will work no big deal namely to remove only hand tighten to install.
I wrapped my OEM shroud to match the Donny Fatboy LDC with a clear Matte finish and I’m awaiting to receive a vinyl carbon fiber wrap that I order on Amazon, but I don’t think I can out do that Cricket he is a master when it comes to CF wraps !
How sweet it is
when the two teams come together perfectly, look guys no hands this time !!!
If you don’t like the added length of a 5/8″ to the OAL of the Mutant you can install Johns LDC adaptor on backwards. :winkn:
Shooting with sound check next time ……. .. ……… ……. .. peew peew …. … ..
~ Greg