Meet the Taipan Mutant….(updated)

.22 cal multi shot.

Heres the whole family…. :8: :8: :8:
yeh the baby is only 22.75″ long….

These don’t discriminate… left or right. Just flip the linkage over and away you go. (this is a pic of the Taipan 2 but they are basically the same, Predesessor of the mutant)

Pretty sweet trigger if i might add…

I will have more info to follow in the coming days…. I figure i would at least throw some pics up …. and get this ball rolling.

They made in Ukraine…..

and now they are available in the US…..

The manufacture claims….

60 shots at 34 FPE…. 250 bar fill .22 cal.

They use CZ barrels…

also avail in .17 cal.

I filled one up tonight to 200 bar and loaded a magazine with jsb 18’s …. it shot 943-947 the whole 12 shots

These come with a soft case. 2 12 round mags.( they fit the Pred’s and other long pellets) a single shot tray, fill probe, orings and tools to adjust the Hammer spring. and to remove the baffles from the shroud….

Tommarow i will take some more pictures and start shooting these…

foxback

Participant

April 19, 2015 at 1:40 am

when r the baby mutants going too be in?
any idea of the power & shot count? 🙄

verminator-66

April 18, 2015 at 3:47 pm

Dose look nice and straight forward

dman1114

April 18, 2015 at 2:28 am

quote shooter3:

What is the barrel diameter of Taipan Mutant?

15 mm….

shooter3

April 17, 2015 at 11:02 pm

secoda

April 15, 2015 at 11:26 pm

Earnest’s Taipan custom stocks? 😛

sniperlabyo

April 15, 2015 at 10:23 pm

quote donnyfl:

The two tone is growing on me 🙂 Very nice setup Ernest. Did you have to lower your fps to make it backyard sniping friendly?

Shoots to good at 900fps with 18.1g ES 4fps 50 shots so I don’t want to mess with the setting, well mostly I shoot over my yard 50 to 150y.

I need some shroud made for the TJ barrel in .25, .257 and .30 cal to fit on the 9mm cricket action, they have different size OD so will let you know the measurements and they all have the stock muzzle threads.

Later

donnyfl

April 15, 2015 at 1:18 pm

April 15, 2015 at 12:40 pm

Here’s a setup when snipping at home with Danny’s 6″ CF LDC.

billyboy

April 13, 2015 at 4:23 pm

Thanks j.
Better lookers than the black ones IMO.

April 13, 2015 at 4:10 pm

Billy all of them coming in this batch should look like this …

Short and standard configuration .

April 13, 2015 at 1:10 pm

I see they come in black stocks or wood finish … Is there a choice when buying one..?

April 13, 2015 at 1:39 am

No, the baffles are pretty tight and don’t want to make a tools just to look, I strongly think they look like the HB baffles so I drilled vent holes for each baffles and made it more quieter, look like one man assembling the short Candy===cant wait!

April 13, 2015 at 1:02 am

ernest so did you disassemble the whole shroud?

You take any pictures? I haven’t taken mine apart. …..

The next batch is moving right along….

heres some eye candy to hold yah over till you get your shorty…. (one of these is yours LOL)

April 13, 2015 at 12:51 am

LDC adapter for the Mutant made by John and makes one for the HB also.

April 9, 2015 at 3:12 am

:dito:

quote sniperlabyo:

Didn’t like The stock finish and feel, so I done this, but was planning on stripping all the black finish–while sanding the flat surface I kinda love the look of the black combo so kept it a that but sprayed rubber coating on the black area–now its more appealing to me, while sanding I rounded off the forearm, and sharp curb on the trigger guard, deepen the finger groove and shape the rear bottom of stock. now just have to fit the adjustable butt pad. I didn’t think the wood was this nice, now I’m glad I done what I DID!

While my shroud end cap is sent to John to make an 1/2 20 LDC adapter I used a Neil CF shroud while at wait! Look pretty sharp.

All Replies