NOT HAPPY WITH SELPHB VALVE!!!!!
Here is my Selphb valve.
Am I impressed? Am I fuck. After this video I installed the valve and tried to fill. I filled to 2500 psi and tried to release the pressure. Each time I opened the bleed( yes, as quickly as poss’) it all bled out again. Why? Because the oring that seals the tophat is too tight. When you depress the tp, you can feel it rolling the oring over in a ‘click’ type of way. When under pressure, this oring is expanding a little and totally locking the tophat open.
I’m gonna have to get the tp shaved a little to make a decent fit, get the stem replaced and put a smaller return spring in. So for the price of a new valve, all I am actually gonna use of this valve is the valve body and tp(once I modify it to work). What a waste of money and time(including Mam’s who sourced it for me)
Totally gutted.
Try and send it back? After all the problems people have had with getting hold of him etc, I don’t think I’ll bother. I’ll be able to sort it out thanks to Sean and Lang, but why the fuck should I have to?
Let me make this clear. THIS IS NOT A COPY OF A BLODNOB VALVE!! IT IS A POOR ATTEMPT AT BEST. MINE DOES NOT FUNCTION AS IS AND WILL REQUIRE EXTENSIVE WORK TO GET IT GOING.
😥
All Replies
Oh they are much more disgusting than a meatball with extra spices.
I tried Faggots once at a Pub that served them. Didn’t care for them either. Now that I found a recipe, I understand why: http://www.yourcounty.co.uk/recipes/faggots.html
Mmmmmmm proper faggots. YUM 😀
Oh they are much more disgusting than a meatball with extra spices.
I tried Faggots once at a Pub that served them. Didn’t care for them either. Now that I found a recipe, I understand why: http://www.yourcounty.co.uk/recipes/faggots.html
Welsh?????? 😯 😯
WTF!!
Born and bred in the South of England.
Now living in the East Midlands.
Had to bust your chops Pab… I knew that Welshmen hate being mistaken
for Englishmen so, I just figured Englishmen hated that too…. Sorry, I couldn’t resist…lol
😆 Your mission was accomplished 😈 😆
Lang was on skype at the time and doing all the cussing for me 😆
And I’ll have you lot know my accent is considered very cultured… 🙄 😆
😆 😆
Would that be a Welsh culture Pab??? 😯
Welsh?????? 😯 😯
WTF!!
Born and bred in the South of England.
Now living in the East Midlands.
Had to bust your chops Pab… I knew that Welshmen hate being mistaken
for Englishmen so, I just figured Englishmen hated that too…. Sorry, I couldn’t resist…lol
Lang was on skype at the time and doing all the cussing for me 😆
And I’ll have you lot know my accent is considered very cultured… 🙄 😆
😆 😆
Would that be a Welsh culture Pab??? 😯
Welsh?????? 😯 😯
WTF!!
Born and bred in the South of England.
Now living in the East Midlands.
Lang was on skype at the time and doing all the cussing for me 😆
And I’ll have you lot know my accent is considered very cultured… 🙄 😆
😆 😆
Would that be a Welsh culture Pab??? 😯
I was surprisingly calm at the time Mam’ 😯
Lang was on skype at the time and doing all the cussing for me 😆
And I’ll have you lot know my accent is considered very cultured… 🙄 😆
😆 😆
Pab, I only wish you would have been recording when you found the valve
would not work under pressure… That would have been classic and would
have gone viral on youtube…lol
I must admit, when you were comparing springs, I played the part where you said, “fucking great thing” about 10 times.
Us rednecks don’t get to hear you funny English folks that often. 😀 😀 😀
I was thinking the same…haha
When talking about the threads and he said “Aw fuck me!” hahaha I loved it.
Wow, Lang woke up again… Good to see ya m8.
Heya Mam. 😀
I’ve been working with plastic lately:
http://www.britmodeller.com/forums/index.php?showtopic=42987
Is this you Lang—->”Siggi”?
Very nice work.. The finishes really look great and authentic….
Wow, Lang woke up again… Good to see ya m8.
Heya Mam. 😀
I’ve been working with plastic lately:
http://www.britmodeller.com/forums/index.php?showtopic=42987
If I’ve said it once, I’ve said it a thousand times. Especially on the Custom Knife Sites.
There is a huge difference between some one who can program a computer to run a CNC machine, and a true Machinest who can make a quality part, one at a time.
Trouble with CNC is that if it is wrong, it will be wrong every damed time 👿
The machine doesn’t go thru a learnig curve with each and every part it makes. It’s stupid as Hell. A good Machinest does and always will learn and improve with each part made.
Make them one at a time until ALL of the bug’s are worked out. Not on a CNC for the initial run. You don’t prototype on a CNC!
The typical CNC operator won’t make a pimple on a real Machinest ASS!
Damed simple really!!! 🙄
Dam Pab! That Sucks Fag’s and all!
Mike
Oh they are much more disgusting than a meatball with extra spices.
- You must be logged in to reply to this topic.
What were you thinking Picudo? 😕 😯 😆
😯 Exactly what WOK said 😯 😆 😆