Offset Moderators Ed promised us?
Ed? Are you making them? are they already made? are they en-route?
All Replies
I should be taking delivery of mine tomorrow.
Anytimw frame on these babies coming up on mid october.
Elmer, ,,, i really like this idea if possible for Eduard to do it ,,, this will reduce the length of the rifles and the rifle will look like a perfect BullPup ,,,not a rifle ,,,, this is something that Ed should take it into consideration ….
Any reason why you can’t design the shroud part to be shorter and the moderator to overlap the barrel to give the whole thing more volume like this?
I’ve love to get a shortie like this but as an R3M.
Thoughts Mr Ed?
Thank you
If it is the same as the .30 cal moderator, it will be a 12mm nut.
http://www.talonairgun.com/forum/viewtopic.php?f=34&t=28271
-L
Anyone know the size of that wrench Ed is using please?
Will the overall length of the gun remain the same with the eccentric shroud installed?
Hey Man,
I don’t have your knowledge in hydraulics or whatever it is but good to know :thumb:
Many Thanks :bow:
(I have to admit that when I saw the popped-out eye of the poor guy I went back to springers for quite a while before becoming again confident with pcps)
Same design as the tarantula. lets say that Eds tube I.d. Is 1.5 inches. I’m guessing here because I don’t know the exact measurements or fastener size and I’m not home to measure them. But let’s exaggerate them for the sake of safety. That makes the end cap surface area 5.551 inches. So 220 bar is 3190 psi. That means the end cap is experiencing 17,712 pounds of force. Now like I said I don’t know the bolt size and I know it’s metric but let’s use a .250″ bolt. Which is slightly smaller in diameter. It’s allowable shear force meaning with its safety factor is roughly 7,500 lbs. with 3 screws that’s 22,500 lbs of allowable force. I think we’re safe. :ugeekn:
This statement needs further investigation đŻ
No kidding with high air pressure components !
Once the endcap of an airtube came off like a bullet and almost killed a person.
The person suffered serious injuries and needed months of hospital care.
I don’t know if anybody saw the pictures on the net but they were very disturbing.
Maybe Ed’s design is even safer than the standard ones but it would be good to know.
You do that! Ed is an idiot – an un trusteable like. You´ll probably never get things he promises.
There will always be broken Bridges, hostile take over of the Russia – or Putin.Or Ed.to wait for parts , or Guns , you´ve paid for months ago . “You´ll get them soon”. That hasn´t work to his favor in Western Countries – where we want things happen now – or at least when promised.
They have things different in Russia : He seriously thinks it´s OK
I patiently await the eclectic moderator.
Thanks Ed, the long-awaited design
Ed’s airtube design is different than normal… he uses screws to secure rather than threading. So it’s not so bad.
Besides it’s only metal right ?? Let’s see what happens…
Haha, that’s awesome! I do agree that Ed’s air tube design is simplistic by not using threaded ends. I’m kinda surprised more manufacturers don’t use the same idea.
- You must be logged in to reply to this topic.
:hoot:
Keep us advised! You are one of a limited source of information on this matter.
Hoot: