Q:

R3M /R3 Review and Performance .WoW

Gentlemen;

First of all i want to apologize to Mr. Eduard and all of you, because i brought you incorrect info regarding the loudness of the new R3M, i told you that it is a little bit louder than my M-Rod, but it is not like this,

Okay, let talk about the loudness, what did you say? loud? Hey Hemn what sound are you talking about? ๐Ÿ˜ฏ guys if the Condor sound level is #5 and M-Rod is #2 then the new R3M is 0.75 ๐Ÿ˜ฏ ๐Ÿ˜ฏ on my point of view, because it is really really quite, yesterday when i did some practice in my fathers backyard all the sparrows and doves or even all birds they were on their position near at me on the trees when i was trying to do some chrony test, never moved and flied, believe me guys,
when i said that R3M is a little bit louder i was in my bed room ๐Ÿ˜ฏ ๐Ÿ˜ฏ when i tried three dry fire,

Eduard you are correct as you told me dry fire is usually louder than fire with pellets …. sorry again…..

it is really really nice rifle and quite also more powerful than the R3,

guys you will be surprised when you see the below strings of the new R3M, here we go……………………………………….

Date Oct 12th 2013,
Edgun Matador R3M, .22 cal, starting pressure was 220 bar as mentioned in the manual.
Pellet; JSB 18.13gr

Eduard please tell me am i sick or these fps are correct ?

Shot# FPS

1 – error
2 – error
3 – 1012 the muzzle was near from the chrony about 50cm the i put the chrony after this shot 60cm away from the muzzle.
4 – dry fire by mistake
5 – 1003
6 – 1003
7 – 1003
8 – 1004
9 – 1005
10 – 1001
11 – 1003 Pressure was 200 bar
12 – 1009
13 – 999.5
14 – 1002
15 – 1001
16 – 1000
17 – 1004
18 – 999.7
19 – 998
20 – 1006 Pressure was 185 bar
21 – 1007
22 – 1003
23 – 1000
24 – 996.2
25 – 1000
26 – 1002
27 – 1000
28 – 1003
29 – 998.1
30 – 999 Pressure was 172 bar
31 – 1002
32 – 998.2
33 – 993.7
34 – 994.9 my place was very very bad for testing my gun so, i had to pull the gun toward me in order to get the perfect position for aiming the target, so, i believe those shots under 999fps occurred because of that.
35 – 995.9
36 – 999
37 – 997
38 – 999
39 – 999.2
40 – 997.9 Pressure was 155 bar
41 – 1011
42 – 997.1
43 – error
44 – error
45 – error
46 – error
47 – error
48 – Fucking error
49 – Fucking error
50 – Fucking error i believe due to the sun set the chrony wasn’t able to read. the last pressure was 145 bar

The average of the total of 39 shots = 1001.2 fps. ( i got the fps of 39 shot that is why i am calculating only 39)

the accuracy is very good out of 40 mtr for me ( since i am a new one to Bullpup and such a high quality of the gun )

Dear Sir Ville; when you read my review you will understand that there are a huge difference between R3 and R3M.

Dear Trygve; please go back to your home and let Mr. Martti ship your new R3M.

I will post the pics of the targets latter…..

Hope other guys who got their R3M share the new info ……………………

EdGun

All Replies

Viewing 15 replies - 151 through 165 (of 265 total)

1 2 3 10 11 12 16 17 18

My dearest Mr. Tedd;

Truly this is a great result that you got, i highly wish you could to do the same for .22 cal as well :thumb: :thumb: :thumb: if i were some one in US i would send my .22 cal Edgun to you and let you do the same test for .22cal also,

Please don’t wish to broke my Edgun air valve rod yet, hahahaha ๐Ÿ˜† ๐Ÿ˜† ๐Ÿ˜† i am joking…. till i will get one…. or two…. then i will do it definitely then will need your kind help and advice to adjust the reg.

i will try to find out the best accuracy by adjusting the HST for the time being….

quote oldgoat:

Brother Hemn: I have had a couple of 25 cal long Version Matadors. After many full days of testing at the local 100 yard range, I found that speeds of around 850 fps gave the best accuracy. I found this to be true whether there was no wind or, if there was a 3-7 mph side wind. If the wind was blowing faster than that, I didnโ€™t think that I could get good info.

I found that as I increased the speeds, the wind would affect the groups more. I finally settled on 885-890 fps for a little flatter trajectory and still get good groups.

I found that speeds over 900 were overly affected by wind and that speeds any higher than that were really affected.

At 885 fps, my 25 cal long Matadors give me 68-70 regulated shots before they come off of the regulator and the speeds start dropping.

I have never owned a 22 cal long version Matador but, I think that you should easily get around 90-110 regulated shots, at 890 fps, once you get it broken in and tuned.

Your groups are looking good right now! I want to see what you come up with once the Matador is broken in; you turn it down and get serious!

Brother Hemn: I have had a couple of 25 cal long Version Matadors. After many full days of testing at the local 100 yard range, I found that speeds of around 850 fps gave the best accuracy. I found this to be true whether there was no wind or, if there was a 3-7 mph side wind. If the wind was blowing faster than that, I didnโ€™t think that I could get good info.

I found that as I increased the speeds, the wind would affect the groups more. I finally settled on 885-890 fps for a little flatter trajectory and still get good groups.

I found that speeds over 900 were overly affected by wind and that speeds any higher than that were really affected.

At 885 fps, my 25 cal long Matadors give me 68-70 regulated shots before they come off of the regulator and the speeds start dropping.

I have never owned a 22 cal long version Matador but, I think that you should easily get around 90-110 regulated shots, at 890 fps, once you get it broken in and tuned.

Your groups are looking good right now! I want to see what you come up with once the Matador is broken in; you turn it down and get serious!

Dear My Nucle H ๐Ÿ˜ฏ ๐Ÿ˜ฏ T;

Do you think the Edgun can provide a good performance at 100bar? What is the best end pressure for Edgun?

i know this depends on the Reg adjustment, but tell us about yours?

quote Hoot:

For what it’s worth, I get about 52 shots from, 200 bar down to 100 bar, with my .25 Edgun Long, at 880 fps.

How do you know that my Edgun is longer than yours? this question is a little bit curious,,,, ๐Ÿ˜† ๐Ÿ˜† ๐Ÿ˜† ๐Ÿ˜† just for joking…. ๐Ÿ˜€ ๐Ÿ˜€

quote Hoot:

That’s because my Edgun is longer than your Edgun!!!!

For what it’s worth, I get about 52 shots from, 200 bar down to 100 bar, with my .25 Edgun Long, at 880 fps.

That’s because my Edgun is longer than your Edgun!!!!

dear brother john;

yes of course, we are a big family and brothers here, i do like all of you, all are helpful and like help his brothers, this is always appreciated by me…. hope the best for all….

thanks for your writing …. ๐Ÿ˜€ ๐Ÿ˜€ ๐Ÿ˜€

quote hacampbell1360:

Re: R3M Review and Performance .WoW

Postby Hemn ยป Mon Nov 04, 2013 2:19 pm
my dears and my friends or my brothers……

“I really really have no ability to understand all posts by Sir Ville and my Uncle H ๐Ÿ˜ฏ ๐Ÿ˜ฏ T, Yes, of course this is due to my poor English, i don’t know and not even sure this is English or Swedish? hahahaha ๐Ÿ˜† ๐Ÿ˜† ๐Ÿ˜† please don’t think that i am crazy,,, ”

Hemn,

I dont think any one here speaks Iraqi better than you speaking English so no need to worry. We are all big family here, no need to feel bad. I am with you, ESL (English as second language).

happy shooting,

John

Dear Brother SYN;

I got some advices from Ville, and have turned down the HST 1, 1/2 turn off, the velocity came down to 931 fps, also the accuracy is pretty good, i am happy with that, also shot count is increased, if you go back to page # 3 & 4 you will see the result.

quote synopsys:

Ah, it says ‘long’ in your signature. Missed that since I was looking in the post text… ๐Ÿ˜‰
The groups in the photo look like two at 5/8″ and one at 1/2″ (center to center).

The long range groups, were they at around 1000fps? ๐Ÿ˜•

If so, leave it where it is. Who cares how many shots you get!

If you are looking for more shots per fill you would need to turn it down to the low 900’s or high 800’s. Then your shot count would rise up to around the ‘average’ but you may see your accuracy decrease.

But if you are getting good groups at the current power level i’d keep things the way they are until you get bored of the accuracy! :mrgreen:

Or get another one and mess with that one. ๐Ÿ˜†

Re: R3M Review and Performance .WoW

Postby Hemn ยป Mon Nov 04, 2013 2:19 pm
my dears and my friends or my brothers……

“I really really have no ability to understand all posts by Sir Ville and my Uncle H ๐Ÿ˜ฏ ๐Ÿ˜ฏ T, Yes, of course this is due to my poor English, i don’t know and not even sure this is English or Swedish? hahahaha ๐Ÿ˜† ๐Ÿ˜† ๐Ÿ˜† please don’t think that i am crazy,,, ”

Hemn,

I dont think any one here speaks Iraqi better than you speaking English so no need to worry. We are all big family here, no need to feel bad. I am with you, ESL (English as second language).

happy shooting,

John

He’s already trained at the waiting … ๐Ÿ˜‰

Sent from my iPhone using Tapatalk 2. This POS iPhone sucks though …

Ah, it says ‘long’ in your signature. Missed that since I was looking in the post text… ๐Ÿ˜‰
The groups in the photo look like two at 5/8″ and one at 1/2″ (center to center).

The long range groups, were they at around 1000fps? ๐Ÿ˜•

If so, leave it where it is. Who cares how many shots you get!

If you are looking for more shots per fill you would need to turn it down to the low 900’s or high 800’s. Then your shot count would rise up to around the ‘average’ but you may see your accuracy decrease.

But if you are getting good groups at the current power level i’d keep things the way they are until you get bored of the accuracy! :mrgreen:

Or get another one and mess with that one. ๐Ÿ˜†

Dear Brother Syn;

mine is R3M, .22cal, Long, set up with average of 1001 fps, with 18,13gr JSB, at that speed i got 50 shots from 220 bar down to 145 bar, see the first page here (http://www.talonairgun.com/forum/viewtopic.php?f=22&t=27845),

this pic is my first target practice with my Edgun, 35 mtr, average velocity 1001fps, 18.13gr JSB, ten shots for each bullseyes;

quote synopsys:

Wait, I just looked back and couldn’t find something, is yours the standard or long? ๐Ÿ˜

Your count sounds about right for the standard with the latest regulator.

Wait, I just looked back and couldn’t find something, is yours the standard or long? ๐Ÿ˜

Your count sounds about right for the standard with the latest regulator.

Over 150 shots per fill… :mrgreen:

Beat that buddy!!! :mrgreen:

Of course I have a 177…. :mrgreen: :mrgreen: :mrgreen:

Even my Cricket gets more than YOUR EdGun. :mrgreen: :mrgreen: :mrgreen:

my dears and my friends or my brothers……

I really really have no ability to understand all posts by Sir Ville and my Uncle H ๐Ÿ˜ฏ ๐Ÿ˜ฏ T, Yes, of course this is due to my poor English, i don’t know and not even sure this is English or Swedish? hahahaha ๐Ÿ˜† ๐Ÿ˜† ๐Ÿ˜† please don’t think that i am crazy,,,

Guys, since i did apologize for Kurth and he doesn’t want to listen me or you, so, just ignore him and let him go, and let him write until he gets tire, i don’t accept from myself to use bad words toward anyone, however if he deserves, :mrgreen: :mrgreen: , anyhow, please don’t waste your times …. i really really do appreciate your reactions, i am sorry if you got any bad words because of me, sorry guys again….

okay guys our topic is R3M, lets go back to our lovely guns, please everyone post and let know what is going on?

by the way, i forgot to mention how many shots i got that day, and now i am not so sure, but i think it was 195 bar to 145 bar , if i am not wrong i got 42 or 52 shots, i am not sure โ— โ— โ—

Please, guys, i am just curious to know how many shots do you get with one fill with your bullpups? please mention the brand and version as well

quote hacampbell1360:

Hi Kurt,

The person that you you are after had already apologized to you many many times. He is sincere. All he wanted is to offer you friendship and drop all this nonsense. I know you are not happy with some of the remarks the members here made, but let’s stop calling names or use inappropriate language. We are all grown up here. I like to call everybody to stop giving profanity or responding to one from here on out.

Thanks

John

Sadly this is not that kind of forum. If you are looking for a controlled, censored and “nice” languaged forum you might try the Yellow. ๐Ÿ˜‰

Best part about this whole thing is watching two people with essentially the same opinion battle about different manufacturers. If both are right, both are then wrong.

Wait one minute…I just had a thought….

Chemtrail???….were you released from the asylum. Did you change your name to Kurth?

Isn’t “Kurth” ancient Celtic for “I swallow!” ? Is it you? Huh? Huh?

H ๐Ÿ˜ฏ ๐Ÿ˜ฏ t

PS: John…Ummm, we tend to be somewhat “Earthy” here. We all respect adult behavior, and serious discussion, and most of what goes on here is very informative and friendly. That being said…we don’t hold back our more visceral opinions. While I personally attempt to keep order, and display an educated, temperate, and mature example for all to emulate, I fail profoundly in many respects. I apologise profoundly if any of the remarks from the diseased, scab covered, pricks, who occasionally visit us, have offended you. It is never our desire to offend anyone. However, there have been reports….. Yes, sadly, there have been unsubstantiated reports and rumors of untoward behavior by forum members….

Viewing 15 replies - 151 through 165 (of 265 total)

1 2 3 10 11 12 16 17 18
  • You must be logged in to reply to this topic.